661178
5
Zoom out
Zoom in
Previous page
1/16
Next page
2. Setting Up Your Baby Lock Embellisher
1. Plug in the machine: Plug the power cord
into the machine first, then into a wall out-
let. Always make sure the power is off and
remove the plug from the wall outlet when
the machine is not in use, or when making
any adjustments such as changing needles
or light bulb. Available foot control for
U.S.A.: Model EZ-168A.
2. Polarized Plug: This appliance has a polar-
ized plug (one blade wider than the other).
To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not modify the
plug in any way.
3. Foot control: The felting speed of the
machine is determined by the amount of
pressure applied to the foot control. When
not in use, do not place anything on the
foot control or the machine could start inad-
vertently and the foot control or motor could
burn out.
4. Cloth Presser: The cloth presser is to
prevent cloth/fabric/material from flapping
during the felting process. Place the
cloth/fabric/materials on the needle plate
and under the cloth presser. Lower the
cloth presser lifter lever. To adjust the
height of the cloth presser, turn the cloth
presser height adjusting screw until you get
the correct height for your cloth/ fabric/
material. Turn the cloth presser height
adjusting screw counter-clockwise to raise
the cloth presser. Turn the cloth presser
height adjusting screw clockwise to lower
the cloth presser. The cloth/fabric/material
should move freely under the cloth presser
without any restrictions.
2
Cloth presser height adjusting screw
Turn left (counter-clockwise)
Cloth presser is raised
Turn right (clockwise)
Cloth presser is lowered
Cloth presser
Cloth presser
lifter lever
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Embellisher at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Embellisher in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info