661185
333
Zoom out
Zoom in
Previous page
1/364
Next page
TROUBLESHOOTING
319
Appendix
7
Fabric does not feed
through the machine
Feed dogs are set in the down position.
Press , and then turn the handwheel to
raise the feed dogs.
105
Stitches are too close together. Lengthen the stitch length setting. 67
Wrong presser foot was used. Use the correct presser foot.
“STITCH SETTING
CHART”
Needle is turned, bent or the point is dull. Replace the needle. 56
Thread is entangled. Cut the entangled thread and remove it from
the race.
Fabric puckers There is a mistake in the upper or bobbin
threading.
Check the steps for threading the machine
and rethread it correctly.
43, 46
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combination” chart.
58
Thread tension is set incorrectly. Adjust the thread tension. 67, 225
Stitches are too long when sewing thin fabrics. Shorten the stitch length. 67
Needle is turned, bent or the point is dull. Replace the needle. 56
Spool cap is set incorrectly. Check the method for attaching the spool cap,
then reattach the spool cap.
46
Wrong presser foot. Use the correct presser foot. “STITCH SETTING
CHART”
High-pitched sound
while sewing
Dust or lint is caught in the feed dogs. Remove the dust or lint. 312
Pieces of thread are caught in the race. Clean the race. 312
Upper threading is incorrect. Check the steps for threading the machine
and rethread the machine.
46
There are scratches on the race. Replace the race, or consult your authorized
retailer.
312
A bobbin designed specifically for this machine
is not used.
Incorrect bobbins will not work properly. Only
use a bobbin designed specifically for this
machine.
43
Character pattern
does not turn out
Wrong presser foot was used. Attach the correct presser foot. “STITCH SETTING
CHART”
Pattern adjustment settings were set incorrectly. Revise the pattern adjustment settings. 153
Did not use a stabilizer material on thin fabrics
or stretch fabrics.
Attach a stabilizer material. 152
Thread tension is set incorrectly. Adjust the thread tension. 67, 225
Fabric was pulled, pushed or fed at an angle
while it was being sewn.
Sew while guiding the fabric with your hands
so that the fabric is fed in a straight line.
60
Problem Cause Solution Page
333


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ellisimo BLSO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ellisimo BLSO in the language / languages: English as an attachment in your email.

The manual is 28,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Ellisimo BLSO

Baby Lock Ellisimo BLSO User Manual - English - 29 pages

Baby Lock Ellisimo BLSO Additional guide - English - 49 pages

Baby Lock Ellisimo BLSO Additional guide - English - 8 pages

Baby Lock Ellisimo BLSO Quick start guide - English - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info