525702
239
Zoom out
Zoom in
Previous page
1/268
Next page
CARE AND MAINTENANCE
Appendix
227
7
h
Insert the bobbin case so that the S mark
on the bobbin case aligns with the z mark
on the machine.
* Align the S and z marks.
a S mark
b z mark
c Bobbin case
i
Insert the tabs on the needle plate cover
into the needle plate, and then slide the
cover back on.
Cleaning the Bobbin Case
Thread wax and dust easily collect around the
notch in the tension spring on the bobbin case,
resulting in an incorrect thread tension. Therefore,
the bobbin case should be cleaned as necessary
should tension problems arise.
When cleaning the bobbin case, use card stock or
another type of paper of similar thickness and
sturdiness in order to prevent pieces of paper
tearing off and getting lodged in the bobbin case.
a
Follow steps “Cleaning the Race” on page
226.
b
Using a piece of paper of adequate
thickness and sturdiness, slide the paper
between the tension plate base and the
tension spring and also slide the paper
behind the notch of the spring to remove
any dirt or dust.
a Tension plate base
b Notch
c Paper (e.g. business card type)
d Tension spring
e Bobbin case projection (stopper)
c
Use the included cleaning brush to remove
any lint and dust from inside the bobbin
case.
d
Reinsert the bobbin case and needle plate
cover assuming the bobbin case projection
(stopper) is touching the bracket spring.
(Follow steps
h and i from the previous
section.)
Note
Never use a bobbin case that is scratched;
otherwise, the upper thread may become
tangled, the needle may break, or sewing
performance may suffer. For a new bobbin
case (part code: XC3153-351 (green screw),
XC8167-551 (no marking)), contact your
nearest authorized retailer.
Be sure that the bobbin case is correctly
installed. Otherwise, the needle may break.
Note
If the needle plate has been removed it is
especially important to reinstall the needle
plate and tighten the screws prior to
installing the bobbin case.
a
b
b
a
Memo
Do not bend the tension spring. In addition, do
not use anything other than recommended
paper to clean the bobbin case.
c
b
a
d
a
d
e
239


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ellegante3 BLG3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ellegante3 BLG3 in the language / languages: English as an attachment in your email.

The manual is 15,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Ellegante3 BLG3

Baby Lock Ellegante3 BLG3 Additional guide - English - 120 pages

Baby Lock Ellegante3 BLG3 Quick start guide - English - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info