525700
52
Zoom out
Zoom in
Previous page
1/241
Next page
SEWING
Sewing Basics
41
2
'
Press the “Start/Stop” button to start
sewing.
* Guide the fabric lightly by hand.
(
Press the “Start/Stop” button again to stop
sewing.
)
Press the “Thread Cutter” button to trim
the threads.
! The needle will return to the up position
automatically.
*
When the needle has stopped moving, raise
the presser foot and remove the fabric.
Using the Foot Controller
You can also use the foot controller to start and stop
sewing.
!
Pull the retractable cord out from the foot
controller to the desired length, and then
insert the foot controller plug into its jack
on the machine.
a Foot controller
b Foot controller jack
CAUTION
Do not press the “Thread Cutter” button after
the threads have been cut. Doing so could
tangle the thread or break the needle and
damage the machine.
Do not press the “Thread Cutter” button when
there is no fabric set in the machine or during
machine operation. The thread may tangle,
possibly resulting in damage.
Note
When cutting thread thicker than #30, nylon
thread, or other decorative threads, use the
thread cutter on the side of the machine.
Memo
This machine is equipped with a bobbin thread
sensor that warns you when the bobbin thread
is almost empty. When the bobbin thread is
nearly empty, the machine automatically
stops. However, if the “Start/Stop” button is
pressed, a few stitches can be sewn. If the
warning displays, re-thread the machine
immediately.
CAUTION
Do not allow fabric pieces and dust to collect in
the foot controller. Doing so could cause a fire or
an electric shock.
Memo
When the foot controller is being used, the
“Start/Stop” button has no effect on sewing.
The foot controller cannot be used when
embroidering. The foot controller can be
used for sewing utility and decorative
stitches when the embroidery unit is
attached.
Note
Do not pull retractable cord out beyond the red
mark.
b
a
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ellegante BLG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ellegante BLG in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Ellegante BLG

Baby Lock Ellegante BLG Additional guide - English - 7 pages

Baby Lock Ellegante BLG Additional guide - English - 2 pages

Baby Lock Ellegante BLG Additional guide - French, Spanish - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info