525697
72
Zoom out
Zoom in
Previous page
1/152
Next page
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
70
Selecting stitching
Using the operation panel keys, select the desired
stitch. Ten of the most often used utility stitches can
quickly be selected with the numeric keys.
Right after turning the power on, the straight stitch
(left needle position) is selected.
The machine can also be set to select the straight
stitch (center needle position). For details, refer to
“Changing the settings” (page 17).
a
Determine the stitch that you wish to use.
For the numbers of the various stitches, refer
to the stitch pattern plate and “Stitch Settings”
(page 128).
a Stitch pattern plate
b
Determine which presser foot should be used
with the selected stitch.
The presser feet are stored in the accessory
compartment.
For details on the stitches that can be sewn
with the twin needle, refer to “Stitch Settings”
(page 128).
c
Attach the presser foot.
For details, refer to “Replacing the presser
foot” (page 39).
d
Turn on the sewing machine.
X The straight stitch (left needle position) is
shown selected in the LCD.
e
After selecting the stitch mode, select the
stitch pattern.
With direct selection
With direct selection, there are two stitch modes:
preset utility stitch mode and saved pattern
mode .
a
Press (Preset utility stitch/saved pattern
key) to select the stitch mode.
: Preset utility stitch
The 10 stitch patterns printed on the
numeric keys can be selected directly.
When appears in the lower-left corner
of the screen when the machine is turned
on or when the (Preset utility stitch/
saved pattern key) is pressed.
: Saved patterns
The 10 stitch patterns saved with the
numeric keys can be selected directly.
When appears in the lower-left corner
of the screen when (Preset utility
stitch/saved pattern key) is pressed.
X When a direct selection mode is selected,
(Preset utility stitch/saved pattern key)
lights up.
X After the icon for the selected stitch mode
appears in the center of the screen, a screen
for selecting the stitch appears with the icon
for the stitch mode in the lower-left corner.
However, when the machine is turned on,
appears only in the lower-left corner of
the screen and does not appear in the center
of the screen.
Example: preset utility stitch
1
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Elizabeth BL200A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Elizabeth BL200A in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Elizabeth BL200A

Baby Lock Elizabeth BL200A Quick start guide - English - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info