661184
185
Zoom out
Zoom in
Previous page
1/225
Next page
CARE AND MAINTENANCE
378
Cleaning the Bobbin Case
Thread wax and dust easily collect around the
notch in the tension spring on the bobbin case,
resulting in an incorrect thread tension. Therefore,
the bobbin case should be cleaned as necessary
should tension problems arise.
When cleaning the bobbin case, use card stock or
another type of paper of similar thickness and
sturdiness in order to prevent pieces of paper
tearing off and getting lodged in the bobbin case.
a
Follow steps a to f in “Cleaning the
Race” to remove the bobbin case.
b
Using a piece of paper of adequate
thickness and sturdiness, slide the paper
between the tension plate base and the
tension spring and also slide the paper
behind the notch of the spring to remove
any dirt or dust.
a Tension plate base
b Notch
c Paper (e.g. business card type)
d Tension spring
c
Use the cleaning brush to remove any lint
and dust from inside the bobbin case.
d
Replace the bobbin case and needle plate
cover.
Cleaning the Cutter in the Bobbin
Case Area
The cutter below the needle plate should be
cleaned. If dust or lint accumulate on the cutter, it
will be difficult to cut the thread when the “Thread
Cutter” button is pressed or the automatic thread
cutting function is used. Clean the cutter when the
thread is not easily cut.
a
Follow steps a through e in “Cleaning the
Race” to remove the needle plate cover.
b
Use the screwdriver included with the
machine to unscrew and remove the needle
plate.
c
Use the cleaning brush or a vacuum cleaner
to remove any lint and dust from the cutter
in the bobbin case area.
a Cutter
d
Use the screwdriver included with the
machine to screw and attach the needle
plate.
Memo
Do not bend the tension spring. In addition,
do not use anything other than
recommended paper to clean the bobbin
case.
CAUTION
Do not touch the cutter, otherwise injuries
may result.
185


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny II - BLDY2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny II - BLDY2 in the language / languages: English as an attachment in your email.

The manual is 14,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny II - BLDY2

Baby Lock Destiny II - BLDY2 Additional guide - English - 52 pages

Baby Lock Destiny II - BLDY2 User Manual - English - 198 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info