661184
174
Zoom out
Zoom in
Previous page
1/225
Next page
CREATING BOBBIN WORK (SEWING)
367
How to Create Bobbin Work
8
q
When you have reached the end of the
stitching area, stop the machine.
r
Raise the needle and presser foot.
s
Leaving about 10 cm (approx. 4 inches) of
thread at the ends, use scissors to cut the
threads.
a 10 cm (approx. 4 inches)
Finishing the thread ends
a
At the end of the stitching, use a hand
sewing needle to bring the bobbin thread
up to the wrong side of the fabric.
a Wrong side of fabric
b Bobbin thread
b
Working from the wrong side of the fabric,
tie the bobbin and upper threads together
by hand. Cut away excess threads with
scissors.
a Wrong side of fabric
b Right side of fabric
c
If the desired results could not be achieved,
adjust the tension of the bobbin thread and
of the upper thread, and then try sewing the
stitching again.
For more details, refer to “ADJUSTING BOBBIN
WORK THREAD TENSION” on page 372.
Bobbin Work Free Motion
Sewing
If so desired, use a template or draw your design
on the stabilizer to allow for ease of stitching.
Remember, your stitches with your decorative
thread will be on the underneath side of your
fabric and the stabilizer will be on the top of the
wrong side of your fabric.
* For bobbin work free motion sewing use the
instructions for “CREATING BOBBIN WORK
(SEWING)” on page 365.
* For information about using the free motion quilting
foot “C”, free motion open toe quilting foot “O”, or
free motion echo quilting foot “E” refer to “Free
Motion Quilting” on page 131.
Note
Before sewing, check that there is enough
thread in the bobbin.
Note
Do not sew reinforcement/reverse stitches
at the end of the stitching, otherwise the
threads may become tangled or the needle
may break. In addition, it will be difficult to
pull the bobbin thread up to the wrong side
of the fabric.
Note
Do not press the “Thread Cutter” button to
cut the threads, otherwise the machine may
be damaged.
Note
If it is difficult to place bobbin thread
through the eye of a hand sewing needle,
use a ribbon embroidery needle to pull the
thread up to the wrong side of the fabric.
Otherwise, use an awl to pull up the bobbin
thread.
Note
To ensure threads do not come undone
after being tied place a drop of fabric glue
on knots.
174


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny II - BLDY2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny II - BLDY2 in the language / languages: English as an attachment in your email.

The manual is 14,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny II - BLDY2

Baby Lock Destiny II - BLDY2 Additional guide - English - 52 pages

Baby Lock Destiny II - BLDY2 User Manual - English - 198 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info