661184
17
Zoom out
Zoom in
Previous page
1/198
Next page
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
15
The names of the various parts of the sewing machine and their functions are described below. Before
using the sewing machine, carefully read these descriptions to learn the names of the machine parts.
Machine
Front View
a Top cover
Open the top cover when threading the machine or winding the
bobbin.
b Pre-tension disk
Pass the thread around the pre-tension disk when winding the
bobbin thread. (page 52)
c Thread guide for bobbin winding
Pass the thread through this thread guide when winding the
bobbin thread. (page 52)
d Spool pin
Place a spool of thread on the spool pin. (page 60)
e Spool cap
Use the spool cap to hold the spool of thread in place. (page
60)
f Supplemental spool pin
Use this spool pin to wind the bobbin thread, or to sew with the
twin needle. (page 52, 63)
g Bobbin winder
Use the bobbin winder when winding the bobbin. (page 52)
h LCD (liquid crystal display)
Settings for the selected stitch and error messages appear in
the LCD. (page 30)
i Speaker
j Knee lifter
Use the knee lifter to raise and lower the presser foot. (page 94)
k Knee lifter slot
Insert the knee lifter into the slot. (page 94)
l Operation buttons (7 buttons) and sewing speed
controller
Use these buttons and the slide to operate the sewing
machine. (page 17)
m Flat bed attachment with accessory compartment
Store presser feet and bobbins in the accessory compartment
of the flat bed attachment. When sewing cylindrical pieces,
remove the flat bed attachment. (page 18)
n Thread cutter
Pass the threads through the thread cutter to cut them. (page
62)
o Thread guide plate
Pass the thread around the thread guide plate when threading
upper thread. (page 60)
Right-side/Rear View
a Connector for the presser foot
Connect the dual feed foot or embroidery foot with LED
pointer. (page 70, 197)
b Handle
Carry the sewing machine by its handle when transporting the
machine.
c Presser foot lever
Raise and lower the presser foot lever to raise and lower the
presser foot. (page 68)
d Air vent
The air vent allows the air surrounding the motor to circulate.
Do not cover the air vent while the sewing machine is being
used.
e Main power switch
Use the main power switch to turn the sewing machine ON and
OFF. (page 28)
f Multi-function foot controller
Various sewing machine operations can be programmed into
the multi-function foot controller. For some countries and
areas, normal foot controller is included with the machine.
g Power cord receptacle
Insert the power cord into the machine receptacle. (page 28)
h Sensor pen holder connector
Connect the included sensor pen holder. (page 49)
i Sensor pen jack
Connect the sensor pen. (page 48)
j Foot controller jack
Insert the foot controller plug into its jack on the machine.
(page 81)
k Headphones or external speaker jack
Connect the headphone.
l USB port for computer
In order to import/export patterns between a computer and the
machine, plug the USB cable into the USB port. (page 46, 187,
189, 192, 208, 284, 300, 402)
m USB port for mouse (page 46)
n USB port
In order to send patterns from/to USB media, plug the USB
media directly into the USB port. (page 34, 46,187,188, 191,
207, 225, 274, 284, 299, 401)
o Handwheel
Rotate the handwheel toward you (counterclockwise) to raise
and lower the needle. The wheel should be turned toward the
front of the machine.
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny II - BLDY2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny II - BLDY2 in the language / languages: English as an attachment in your email.

The manual is 14,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny II - BLDY2

Baby Lock Destiny II - BLDY2 Additional guide - English - 52 pages

Baby Lock Destiny II - BLDY2 User Manual - English - 225 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info