661183
202
Zoom out
Zoom in
Previous page
1/225
Next page
ERROR MESSAGES
395
Appendix
9
This message appears
when there are not enough
colors in the thread table,
to display the color scheme
effect you have selected.
In this case, select another
effect or the custom thread
table (300 color palette) or
less colors in the color
visualizer function. (See
page 227.)
If there are not enough
number of colors set in the
custom thread table, set
more colors in the table.
(See page 223.)
This message is displayed
when the automatic needle
threading button is pushed
while twin needle sewing is
set.
This message is displayed
when the “Start/Stop
button is pressed before
the edge of the fabric is
detected. To detect the
edge of the fabric using the
built-in camera, press
, raise the presser
foot, and then perform the
operation again. (see page
160)
This message is displayed
when the built-in camera
cannot detect the edge of
the fabric.
If this message appeared
after sewing has reached 1
to 2 cm (about 3/8 to 3/4
inch) from the edge of the
fabric, refer to step
m in
“Edge Sewing” on
page 165.
If this message appeared
during edge sewing, the
edge of the fabric cannot
be detected by the built-in
camera. Press ,
raise the presser foot, raise
the needle if it is lowered,
and then perform the
procedure described in
“Edge Sewing” on
page 162 starting from step
f.
If this error message
appears again, sew without
using edge sewing
function.
This message appears
when you try to save more
than 100 camera image or
settings screen image files
in the USB media. In this
case, delete a file from the
USB media or use different
USB media. (See page 34
and 96)
This message appears
when or is
pressed to delete the
settings for a utility stitch.
To delete the selected
settings, press .
This message is displayed
when an unusable
embroidery card is
inserted.
This message is displayed
when the “Reverse/
Reinforcement Stitch”
button is pushed while the
embroidery unit is
attached.
This message is displayed
when the foot controller is
pressed while the
embroidery unit is attached
and machine is set up for
embroidering.
This message is displayed
when the patterns you are
editing take up too much
memory, or if you are
editing too many patterns
for the memory.
This message is displayed
when a key on the LCD
display is touched while the
needle is in the down
position.
This message is displayed
when there are too many
characters and the curved
character configuration is
impossible.
This message is displayed
when the machine is in
embroidery mode, and the
character pattern
combination is too large to
fit in the embroidery frame.
202


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny - BLDY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny - BLDY in the language / languages: English as an attachment in your email.

The manual is 13,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny - BLDY

Baby Lock Destiny - BLDY Quick start guide - English - 67 pages

Baby Lock Destiny - BLDY Quick start guide - English - 66 pages

Baby Lock Destiny - BLDY User Manual - English - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info