661183
197
Zoom out
Zoom in
Previous page
1/225
Next page
TROUBLESHOOTING
390
Upper thread breaks. Machine is not threaded correctly (used the
wrong spool cap, spool cap is loose, the
thread did not catch the needle bar threader,
etc.)
Rethread the machine correctly. 60
Knotted or tangled thread is being used. Remove any knots or tangles.
The selected needle is not appropriate for the
thread being used.
Select a needle that is appropriate for the type
of thread being used.
75
Upper thread tension is too tight. Adjust the thread tension. 90, 287
Thread is twisted. Use scissors, etc., to cut the twisted thread
and remove it from the race, etc.
Needle is turned, bent or the point is dull. Replace the needle. 73
Needle is installed incorrectly. Reinstall the needle correctly. 73
There are scratches around the opening of the
needle plate.
Replace the needle plate, or consult your
authorized Baby Lock retailer.
117
There are scratches around the opening in the
presser foot.
Replace the presser foot, or consult your
authorized Baby Lock retailer.
68
There are scratches on the bobbin case. Replace the bobbin case, or consult your
authorized Baby Lock retailer.
376
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
75
While sewing, the thread became knotted or
tangled.
Rethread upper and lower thread. 57, 60
A bobbin designed specifically for this
machine is not used.
Incorrect bobbins will not work properly. Only
use a bobbin designed specifically for this
machine.
57
The thread is tangled
on the wrong side of
the fabric.
Upper threading is incorrect. Check the steps for threading the machine and
rethread the machine. Be sure that the presser
foot is in the raised position when threading
the machine so that the upper thread sets
properly in the upper tension.
60
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
75
The upper thread is
too tight.
The bobbin thread is incorrectly installed. Correctly install the bobbin thread. 57
Bobbin thread
breaks.
Bobbin is set incorrectly. Reset the bobbin thread correctly. 57
Bobbin thread is incorrectly wound. Use a correctly wound bobbin. 52
There are scratches on the bobbin or it doesn’t
rotate properly.
Replace the bobbin. 57
Thread is twisted. Use scissors, etc. to cut the twisted thread
and remove it from the race, etc.
A bobbin designed specifically for this
machine is not used.
Incorrect bobbins will not work properly. Only
use a bobbin designed specifically for this
machine.
57
Fabric puckers. There is a mistake in the upper or bobbin
threading.
Check the steps for threading the machine and
rethread it correctly.
57, 60
Spool cap is set incorrectly. Check the method for attaching the spool cap,
then reattach the spool cap.
60
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
75
Needle is turned, bent or the point is dull. Replace the needle. 73
Stitches are too long when sewing thin fabrics. Shorten the stitch length. 89
Thread tension is set incorrectly. Adjust the thread tension. 90, 287
Wrong presser foot. Use the correct presser foot. “STITCH SETTING
CHART”
The stitch is not sewn
correctly.
The presser foot that is used is not appropriate
for the type of stitch that you wish to sew.
Attach the presser foot that is appropriate for
the type of stitch that you wish to sew.
“STITCH SETTING
CHART”
The thread tension is incorrect. Adjust the tension of the upper thread. 90
The thread is tangled, for example, in the
bobbin case.
Remove the tangle thread. If the thread is
tangled in the bobbin case, clean the race.
376
Skipped stitches Machine is threaded incorrectly. Check the steps for threading the machine and
rethread it correctly.
60
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
75
Problem Cause Solution Page
197


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny - BLDY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny - BLDY in the language / languages: English as an attachment in your email.

The manual is 13,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny - BLDY

Baby Lock Destiny - BLDY Quick start guide - English - 67 pages

Baby Lock Destiny - BLDY Quick start guide - English - 66 pages

Baby Lock Destiny - BLDY User Manual - English - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info