661183
166
Zoom out
Zoom in
Previous page
1/225
Next page
PREPARING FOR BOBBIN WORK
359
How to Create Bobbin Work
8
Required Materials
Bobbin case and bobbin cover
a Bobbin case (gray)
There is a notch at the location indicated by the
letter “A”.
a Bobbin cover
There are two small v-shaped tabs on the back of
the bobbin cover as indicated by the letter “B”.
The tabs help hold the bobbin in place so it does
not lift up while thick thread is being pulled
through.
Lower thread
We recommend the following types of threads for
bobbin work.
* When wide ribbon or heavy weight threads are being used, we
recommend test sewing with and without bobbin case tension
being applied to see which gives the best stitching results.
If wide ribbon such as 3.5mm (approx. 1/8 inch) is to be used,
we recommend that bobbin case tension not be applied. Refer
to page 363 for more detailed instructions.
Upper thread
Upper thread choices can vary depending on the
finished look you would like to achieve. By using
sewing machine embroidery thread (polyester),
multipurpose polyester thread, or monofilament
(transparent nylon) thread the appearance of a single
design can be changed many times just by choosing
a different upper thread weight and/or color.
If you do not wish for the upper thread to be visible,
we recommend using transparent nylon
monofilament thread or polyester light weight
thread (50wt. or above) that is the same color as the
lower thread.
Needle
Use a needle appropriate for the upper thread and
fabric being used. Refer to “Fabric/Thread/Needle
Combinations” on page 75 and “Embroidery Step by
Step” on page 196.
Presser foot
Utility stitches or decorative stitches:
Monogramming foot “N
Free motion sewing: Free motion quilting foot “C”,
Free motion open toe quilting foot “O” or Free
motion echo quilting foot “E”
Embroidery: Embroidery foot “W+” or Embroidery
foot “W” (optional)
PREPARING FOR BOBBIN WORK
<Sewing/Embroidery>
No.5 or finer hand embroidery
thread or decorative thread
Flexible woven ribbon
(When embroidering: approx. 2mm
(approx. 5/64 inch) recommended)
<Sewing only>
Fine embroidery ribbon (silk or
silk-like material) (3.5 mm (approx.
1/8 inch) or less, recommended)
Note
Do not use thread heavier than No.5 hand
embroidery thread.
Some threads may not be appropriate for
bobbin work. Be sure to sew trial stitches
before sewing on your project.
N
C
C
O
O
E
E
W+
W
166


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny - BLDY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny - BLDY in the language / languages: English as an attachment in your email.

The manual is 13,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny - BLDY

Baby Lock Destiny - BLDY Quick start guide - English - 67 pages

Baby Lock Destiny - BLDY Quick start guide - English - 66 pages

Baby Lock Destiny - BLDY User Manual - English - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info