661183
136
Zoom out
Zoom in
Previous page
1/196
Next page
SEWING THE STITCHES
134
Using free motion Open Toe Quilting Foot “O”
The free motion open toe quilting foot “O” is used
for free motion quilting with zigzag or decorative
stitches or for free motion quilting of straight lines on
fabric with an uneven thickness. Various stitches
can be sewn using free motion open toe quilting foot
“O”. For details on the stitches that can be used,
refer to the “STITCH SETTING CHART” at the end of
this manual.
Free motion open toe quilting foot “O
a
Press to set the machine to free motion
sewing mode.
The key appears as , the quilting foot is raised
to the necessary height, and then the feed dogs are
lowered for free motion sewing.
b
Select a stitch.
c
Remove the presser foot holder (see page
69).
d
Attach free motion open toe quilting foot
“O” by positioning the pin of the quilting
foot above the needle clamp screw and
aligning the lower-left of the quilting foot
and the presser bar.
a Pin
b Needle clamp screw
c Presser bar
e
Hold the quilting foot in place with your
right hand, and tighten the presser foot
holder screw using the multi-purpose
screwdriver with your left hand.
* Use the multi-purpose screw driver setting the
position to “1”. (see page 23)
a Presser foot holder screw
f
Use both hands to stretch the fabric taut,
and then move the fabric at a consistent
pace in order to sew uniform stitches
roughly 2.0-2.5 mm (approx. 1/16 - 3/32
inch) in length.
a Stitch
Memo
In order to sew with a balanced tension, it
may be necessary to adjust the upper
thread tension (see page 90). Test with a
sample piece of quilting fabric.
Memo
When stitch Q-01 or 1-31 is selected, free
motion quilting foot “C” is indicated in the
upper-left corner of the screen. When the
other stitches are selected, free motion
open toe quilting foot “O” is indicated in the
screen.
O
O
Note
Make sure that the quilting foot is not
slanted.
CAUTION
Be sure to securely tighten the screws with the
included multi-purpose screwdriver.
Otherwise, the needle may touch the quilting
foot, causing it to bend or break.
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny - BLDY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny - BLDY in the language / languages: English as an attachment in your email.

The manual is 12,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny - BLDY

Baby Lock Destiny - BLDY Quick start guide - English - 67 pages

Baby Lock Destiny - BLDY Quick start guide - English - 66 pages

Baby Lock Destiny - BLDY User Manual - English - 225 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info