661183
104
Zoom out
Zoom in
Previous page
1/196
Next page
USING SENSOR FUNCTIONS WITH SEWING STITCH
102
e
Press to apply the first point of the
stitching width.
* The setting can also be applied by applying an
extended touch in the adjustment area with the
sensor pen.
f
With the sensor pen, touch the second
point for the stitching width.
The distance from the left reference line to the
touched position appears in the stitching width
setting screen.
The stitch preview on the upper left side of the
screen is updated according to the specified setting.
The guideline marker moves to the touched position
and flashes.
g
Press to apply the second point of the
stitching width.
* The setting can also be applied by long touching an
adjustment area with the sensor pen.
The needle moves to the specified position to start
sewing.
The stitch selection screen appears again, and the
stitch width and “L/R Shift” change according to the
settings specified with the sensor pen.
Note
The following error message appears if the
area outside of the sensor pen touch range
is touched. Press , and then touch
within the sensor pen touch range.
Memo
The position can be precisely adjusted by
touching the adjustment areas with the
sensor pen.
Note
If the distance between the specified first
and second points is wider than the
maximum stitch width for the selected stitch
pattern, the second point cannot be
specified. Specify a location closer to the
first point.
If the distance between the specified first
and second points is narrower than the
minimum stitch width for the selected stitch
pattern, the second point cannot be
specified. Specify a location further away
from the first point.
Note
With multiple patterns that have been
combined, the specified stitching width is
applied to the pattern with the largest stitch
width. With patterns other than combined
patterns, the stitch width is adjusted to the
stitching width specified for the pattern with
the largest stitch width.
With multiple patterns that have been
combined, the settings specified for the
stitch width and “L/R Shift” in the stitch
selection screen are for the first pattern to
be sewn. The value may differ from the
stitch width setting.
With twin needle sewing, the stitching width
is specified with the left needle as the
reference.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny - BLDY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny - BLDY in the language / languages: English as an attachment in your email.

The manual is 12,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny - BLDY

Baby Lock Destiny - BLDY Quick start guide - English - 67 pages

Baby Lock Destiny - BLDY Quick start guide - English - 66 pages

Baby Lock Destiny - BLDY User Manual - English - 225 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info