661183
95
Zoom out
Zoom in
Previous page
1/196
Next page
USEFUL FUNCTIONS
Sewing Basics
93
2
Adjusting the Brightness of the
Guideline Marker
a
Follow steps from a to c to display the
“Guideline Marker Adjustment” screen.
b
Use or to adjust the brightness of
the guideline marker.
Set the brightness of the guideline marker from “1”
for a dim marker, to “5” for the brightest marker, on
the fabric.
c
Press twice to return to the original
screen.
Pivoting
If the pivot function is selected, the machine stops
with the needle lowered (in the fabric) and the
presser foot is automatically raised to an
appropriate height when the “Start/Stop” button is
pressed. When the “Start/Stop” button is pressed
again, the presser foot is automatically lowered
and sewing continues. This function is useful for
stopping the machine to rotate the fabric.
a
Select a stitch.
CAUTION
When the pivot setting is selected, the
machine starts when the “Start/Stop” button is
pressed or the foot controller is pressed down
even if the presser foot has been raised. Be
sure to keep your hands and other items away
from the needle, otherwise injuries may occur.
Memo
When the pivot setting is selected, the
height of the presser foot when sewing is
stopped can be changed according to the
type of fabric being sewn. Press to
display “Pivoting Height” of the settings
screen. Press or to select one of the
three heights (3.2 mm, 5.0 mm or 7.5 mm).
To raise the presser foot further, increase
the setting. (Normally, 3.2 mm is set.)
Note
The “Needle Position – Up/Down” of the
settings screen, must be set in the down
position
for the pivot function to be
used. When “Needle Position – Up/Down” is
set in the raised position , appears
as light gray and cannot be used.
The pivot function can only be used with
stitches where presser foot “J” or “N” is
indicated in the upper-left corner of the
screen. If any other stitch is selected,
appears as light gray and is not available.
If the pivot function is selected, and
beside “Presser Foot Height” in the settings
screen are not available and the setting
cannot be changed.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny - BLDY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny - BLDY in the language / languages: English as an attachment in your email.

The manual is 12,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny - BLDY

Baby Lock Destiny - BLDY Quick start guide - English - 67 pages

Baby Lock Destiny - BLDY Quick start guide - English - 66 pages

Baby Lock Destiny - BLDY User Manual - English - 225 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info