661183
33
Zoom out
Zoom in
Previous page
1/196
Next page
LCD SCREEN
Getting Ready
31
1
Using the Machine Setting Mode Key
Press to change the default machine settings (needle stop position, embroidery speed, opening
display, etc.). To display the different settings screens, press for “Sewing settings”, for
“General settings” or for “Embroidery settings”.
Sewing settings
a Select whether to use the sewing speed controller to determine the zigzag width (see page 131).
b Make adjustments to character or decorative stitch patterns (see page 174).
c Adjust the presser foot height. Select the height of the presser foot when the presser foot is raised.
d Adjust the presser foot pressure. The higher the number, the greater the pressure will be. Set the pressure at “3” for
normal sewing.
e Adjust the amount of fabric feeding of the dual feed foot (see page 72).
f Select whether “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” is the utility stitch that is automatically
selected when the machine is turned on.
g Select whether “Utility Stitch” or “Quilt Stitch” displayed first on the stitch selection screen when the “Sewing” is
selected.
h You can activate this setting after connecting the multi-function foot controller. (These settings are not operable
unless the multi-function foot controller is attached to the machine.) (see page 82)
i Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page 93).
Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm).
j Change the height of the presser foot when the machine is set to free motion sewing mode (see page 131).
k When set to “ON”, the thickness of the fabric is automatically detected by an internal sensor while sewing. This
enables the fabric to be fed smoothly (see pages 86 and 95).
l When set to “ON”, reinforcement stitches are sewn at the beginning and/or end of sewing for a reinforcement stitch
pattern, even when the “Reverse Stitch” button is pressed (see page 83).
m Adjust the guideline marker position and brightness (see page 98).
n Press to save a settings screen image to USB media (see page 34).
o Press to reset settings. Some settings do not reset.
Memo
Press or to display a different settings screen.
Note
When the straight stitch needle plate is on the machine, the needle will automatically move to the
middle position.
a
b
c
d
e
f
h
g
o
k
l
m
i
j
n
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Destiny - BLDY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Destiny - BLDY in the language / languages: English as an attachment in your email.

The manual is 12,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Destiny - BLDY

Baby Lock Destiny - BLDY Quick start guide - English - 67 pages

Baby Lock Destiny - BLDY Quick start guide - English - 66 pages

Baby Lock Destiny - BLDY User Manual - English - 225 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info