Manual Baby Lock Crafters Choice BLCC2 (page 27 of 112) (English)

525693

Zoom out

Zoom in

1/112

Upper Threading 25

Threading the needle

This section describes how to thread the needle.

Note

● The needle threader can be used with

sewing machine needles 75/11 through

100/16.

● Thread with a thickness of 130/20 or thicker

cannot be used with the needle threader.

● The needle threader cannot be used with

the wing needle or the twin needle.

● If the needle threader cannot be used, refer

to “Threading the needle manually (without

using the needle threader)” (page 26).

Pull the end of the thread passed through the

needle bar thread guide to the left, and then

pass the thread through the thread guide disk

from the front.

1 Thread guide disk

Cut the thread with the cutter on the left side

of the machine.

1 Cutter

Note

● If the thread is pulled through and cannot

be cut correctly, lower the presser foot so

that the thread is held in place before

cutting the thread. If this operation is

performed, skip step 3.

●

When using thread that quickly winds off the

spool, such as metallic thread, it may be

difficult to thread the needle if the thread is cut.

Therefore, instead of using the thread cutter,

pull out about 80 mm (approx. 3 inches) of

thread after passing it through the thread

guide disks (marked “7”).

1 80 mm (3 inches) or more

Lower the presser foot lever to lower the

presser foot.

1 Presser foot lever

Lower the needle threader lever on the left

side of the machine until it clicks, and then

slowly return the lever to its original position.

1 Needle threader lever

X The thread is passed through the eye of the

needle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Crafters Choice BLCC2 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Crafters Choice BLCC2

Baby Lock Crafters Choice BLCC2 Quick start guide - English, French, Spanish - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Crafters Choice BLCC2 Manual

Product: