525692
38
Zoom out
Zoom in
Previous page
1/56
Next page
34
z Carefully mark buttonhole length on fabric.
Place the fabric under the foot with the buttonhole
marking running toward you.
x Move the slider (A) toward you so that the top
mark (C) on the slider meets the start mark (B).
Line up the markings on the foot with the top
mark on the fabric.
c Set the pattern selector dial at “ ”.
Sew forward until you reach the front marking q of
your buttonhole.
Stop sewing at a left stitch with the needle out of the
fabric.
v Set the pattern selector dial at “ ”.
Sew 5 stitches. Stop sewing at a right stitch with the
needle out of the fabric.
b Set the pattern selector dial at “ ”.
Sew until you reach the back marking w of the
buttonhole.
Stop sewing at a right stitch with the needle out of
the fabric.
n Set the pattern selector dial at “ ”.
Sew a few bartacks and raise the needle from the
fabric.
Set the stitch length dial to “0” and the pattern
selector dial at straight sewing.
Sew a few locking stitches.
m Remove the fabric from the machine and cut the
sewing thread. Insert a pin inside the bartack.
Then cut the opening with a seam ripper.
Take care not to cut the stitches.
cv n
m
w
b
z x
q
we
r
q Pattern selector:
w Presser foot: Buttonhole foot
e Thread tension: 1–5
e Stitch length:
Buttonhole
To adjust buttonhole stitch density:
Set the stitch length dial between 0.5 and 1.0 to adjust
the buttonhole stitch density.
(A)
(C)
(B)
q
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock BL9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock BL9 in the language / languages: English as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info