525687
33
Zoom out
Zoom in
Previous page
1/38
Next page
HELPFUL HINTS
Machine not properly threaded.
Rethread
machine.
13
Upper thread
Thread entwined around bobbin.
Clean bobbin area and rethread
bobbin case.
12
breaks
Needle inserted incorrectly.
Reinsert needle.
6
Thread tension too tight.
Readjust thread tension.
17
Thread of incorrect size or poor
quality.
Choose correct thread.
18
Lower thread Bobbin threaded incorrectly. Rethread the bobbin.
12
breaks Bobbin wound unevenly or too
full.
Rewind the bobbin.
11
Dirt in the bobbin and hook area. Clean the bobbin and hook area.
30
Needle inserted incorrectly. Reinsert needle.
6
Machine skips Bent or blunt needle. Insert new needle.
18
stitches Incorrect
Incorrect size needle
size of needle. Choose correct size needle
for fabric.
18
on stretch fabric.
Use stretch needle.
Machine not properly threaded.
Rethread machine.
13
Fabric puckers Bobbin threaded incorrectly. Rethread the bobbin. 12
Blunt needle. Insert new needle. 6
Thread tension too tight. Readjust thread tension. 17
Machine makes
Bobbin threaded incorrectly.
Rethread the bobbin. 12
loose stitches Machine not properly threaded. Rethread machine. 13
or loops Tension not adjusted properly. Readjust thread tension. 17
Threader does Needle is not raised. Raise the needle.
8
not thread Needle inserted incorrectly. Reinsert needle.
6
needle eye Bent needle. Insert new needle. 6
Machine does Feed dogs are lowered. Raise the feed dogs. 8
not feed
properly Lint and dust accumulated around Clean the feed dogs area. 30
feed dogs.
Fabric pulled while sewing. Do not pull fabric. 15
Needle is hitting the presser foot. Select correct foot and pattern. 19
Needle breaks Needle inserted incorrectly. Reinsert needle. 6
Incorrect size needle or thread for Choose correct size needle 18
fabric being sewn. and thread.
Machine runs Dirt or lint accumulated in the hook Remove the needle plate 30
with difficulty race and feed dog. and bobbin case and clean
the hook race and feed dog.
Cord not plugged into electrical Insert plug fully into outlet. 7
outlet.
Power switch is not turned on. Turn on the switch.
7
Machine will not Bobbin winder spindle is pushed to Push spindle to the left. 11
run the right.
Presser foot is not lowered. Lower
Lower the buttonhole lever.
the foot. 15
23
23
Buttonhole Sewing Mode;
Buttonhole lever is not lowered
completely.
Buttonhole foot is not attached.
PROBLEM
CAUSE CORRECTION PAGE
Attach the buttonhole foot.
-31-
-
-
-
-
6
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Audrey BL67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Audrey BL67 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Audrey BL67

Baby Lock Audrey BL67 Quick start guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info