525687
28
Zoom out
Zoom in
Previous page
1/38
Next page
-26-
FEED DOG CONTROL
The feed dogs control the movement of the
fabric that is being sewn.
They should be raised for all general sewing
purposes and lowered for darning, freehand
embroidery and monogramming so that you,
not the feed dogs, are moving the fabric.
DARNING
Select straight sewing stitch number 1. Width
setting should be on 3. Lower the feed dogs.
The length dial setting does not apply when
the feed dogs are lowered.
Remove presser foot and presser foot holder.
Screw the darning foot onto the presser bar
with the extended arm of the foot resting above
the needle clamp screw.
Stretch fabric using embroidery hoops placing
the hole to be darned in the center.
Holding the needle thread, take one stitch and
pick up bobbin thread through the fabric.
Lower presser foot lever and start sewing at a slow to
medium speed, moving the fabric back and forth
with a steady rhythm. Turn fabric and sew another
layer of stitching across over the first layer of
stitching.
STRAIGHT STITCH SEAMING AND QUILTING
STRAIGHT STITCH SEAMING
The straight stitch foot is designed with a small
opening in the foot to provide additional support
against the feed dog teeth when sewing
lightweight fabrics.
QUILTING
The markings on the 1/4 foot are to aid in guiding
fabric edges for perfect 1/16,1/8, or 1/4 seams.
Align the fabric edge with the marking of the foot
for the appropriate seam width. Sew, guiding the
fabric edge along the marking.
01 03
Select stitch #1 in the center needle position.
Because of the small opening, the straight stitch
is the ONLY stitch to be used when sewing with
the straight stitch, quilting or 1/4 foot. Turn the
handwheel and watch that the needle will go into
the needle hole of the foot.
NOTE: When using stitch 03 thread monofilament in the upper thread and tighten the upper tension
to 7. Sew at slow speed and the bobbin thread will appear on the surface of the fabric to resemble
hand stitch quilting.
The feed dog lever is located under the left end
of the free arm.
Push the lever in and to the back of
machine to lower the feed dogs.
Move the lever forward and to the left to raise
the feed dogs. Turn the handwheel forward one
complete turn for the feed dogs to return to
sewing position.
1
1
2
2
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Audrey BL67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Audrey BL67 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Audrey BL67

Baby Lock Audrey BL67 Quick start guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info