1. Raise presser foot lever.
2. Press the needle up / down button or rotate the handwheel toward you to
raise the needle into the up position.
3. Place a spool of thread onto the spool pin and secure with the proper size
spool cap (see page 11).
4. Pass the thread into the thread guide for upper threading and snap forward
between the thread guide and guide plate.
5. Bring thread forward down the right channel, then to the left and up the left
channel.
6. Pull the thread into the take-up lever from right to left and pull thread forward.
7. Pass the thread down the left channel and into the thread guide at the base
of the face cover from right to left.
8. Pass the thread from right to left into the thread guide on the needle clamp.
9. Thread the needle from front to back or follow directions for needle threader
on next page.
