525687
10
Zoom out
Zoom in
Previous page
1/38
Next page
-8-
CONTROL BUTTONS & DROP FEED LEVER
A.START / STOP BUTTON
B.SLIDE SPEED CONTROL LEVER
C.LOW SPEED BUTTON
D.REVERSE STITCH BUTTON
E.NEEDLE UP / DOWN BUTTON
F.DROP FEED LEVER
G.READY INDICATOR
The machine will start running when the START / STOP button is pressed and will stop when
pressed the second time. The machine will sew slowly the first 3 stitches sewn.
When using the START / STOP button, the machine will sew faster when the slide speed
control lever is moved to the right, and sew slower when the lever is moved to the left.
The machine will sew in low speed while holding the low speed button. Press the START / STOP
button or foot control to return toregular speed.
Stitches 1, 2 and 6: The REVERSE STITCH button will sew in reverse while the button is
pressed and return to forward stitching when the button is released.
Other stitches: The REVERSE STITCH button will sew 3-4 stitches to tie-off the stitching
and then stop sewing. Continue sewing by pressing the START / STOP button or foot control.
When the presser foot is down, the needle can be raised or lowered by pressing this button.
When the presser foot is up, press this button for one complete stitch.
The feed dogs project up through the needle plate, directly below the presser foot move the
fabric being sewn. Located under the left end of the free arm, the drop feed lever moves the
feed dogs into the up or down position.
For darning or free motion embroidery or whenever fabric is to be fed by hand, push the lever
in and to the back of machine to lower the feed dogs into the DOWN position.
For return to ordinary sewing, move the lever in and forward to release the lever to move out.
This will position the feed dogs in the UP position for machine feeding.
Green light indicates that the machine is ready to sew.
Red light means an additional step is needed before beginning to sew.
See instructions for the specific stitch selected.
H.DIRECT SELECT BUTTONS
Press one of the seven lighted buttons to quickly select one of the most often used stitches
(For other stitches, refer to page 10).
C
G
D
E
A
B
F
H
I
I.REINFORCEMENT BUTTON
Stop the machine and press this button to sew 4 stitches and tie-off your stitching.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Audrey BL67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Audrey BL67 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Audrey BL67

Baby Lock Audrey BL67 Quick start guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info