768615

Baby Jogger City Select LUX Pram Manual

3
Zoom out
Zoom in
Previous page
1/28
Next page
3
IMPORTANT -Read these instructions carefully
before use and keep them for future reference.
Your child’s safety may be affected if you do not
follow these instructions.
1 From the existin City Select® LUX seat:
Remove the seat from the seat frame by
unsnappin all of the fabric and unfastenin
the velcro® strap around the footwell.
2 Remove the footwell frame from the upper
seat frame by pressin the buttons on both
sides of the footwell and ently pullin until
the pieces separate.
3 Insert the Foot Bar from the Pram Kit into the
seat frame until it clicks into place.
4 Place the Pram within the seat frame so the
top of the seat frame is alined with the top
of the Pram.
NOTE: The top of the seat frame and top
of the Pram are marked “TOP” for your
convenience.
5 Attach the upper U-shaped Pram support rod
around the top section of the seat frame on
both sides.
6 Fasten all snaps around the top portion of the
Pram to the top portion of the seat frame.
7 Attach the lower U-shaped Pram support rod
around the lower section of the seat frame on
both sides.
8 Fasten all snaps around the lower portion of
the Pram to the lower portion of seat frame.
NOTE: When fastenin the snaps, make
sure the fold stop bracket fits underneath
the mountin adapters.
CANOPY - Use your existin seat’s canopy for the
Pram canopy.
9 Snap canopy brackets to both sides of seat
frame.
10 Fasten canopy Velcro® to Velcro® on Pram.
FOOT COVER
11 Fit Foot Cover around lower portion of Pram
and fasten to Velcro® below mountin bracket.
12 Snap Foot Cover.
13 Alin the Pram bracket adapters with the
mountin brackets on your stroller. Press firmly
until the Pram clicks into place.
CARRY STRAPS
14 When not usin the carry straps, use the snaps
to fasten them to the top of the foot cover as
shown.
IMPORTANT -Veuillez lire ces instructions avant
l’utilisation et les arder pour référence future. La
sécurité de votre enfant peut être affectée si vous
ne respectez pas ces instructions.
1 Du sièe présent dans le City Select® LUX
: enlevez le tissu du sièe du cadre en
déboutonnant les boutons-pression et
défaisant les courroies Velcro® autour du
repose-pied.
2 Enlevez le cadre du repose-pied du cadre
supérieur du sièe en appuyant sur les
boutons noirs des deux côtés du repose-pied
et en tirant doucement jusqu’à ce que les
pièces soient séparées.
3 Insérez la barre d’ancrae du landau dans le
cadre du sièe jusqu’à ce qu’elle s’enclenche
en place.
4 Placez le landau à l’intérieur du cadre du
sièe de manière à ce que le haut du cadre
du sièe soit aliné avec le haut du landau.
REMARQUE : le haut du cadre du sièe et le
haut du landau sont identifiés par le mot «
TOP » pour vous aider.
5 Attachez la tie de soutien en U supérieure
du landau autour de la section supérieure du
cadre du sièe sur les deux côtés.
6 Attachez les boutons-pression tout autour
de la partie supérieure du landau à la partie
supérieure du cadre du sièe.
7 Attachez la tie de soutien en U inférieure
du landau autour de la section inférieure du
cadre du sièe sur les deux côtés.
8 Attachez les boutons-pression tout autour
de la partie inférieure du landau à la partie
inférieure du cadre du sièe.
REMARQUE : lorsque vous attachez les
boutons-pression, veillez à ce que le
support de la butée de pliae soit loé
en dessous des adaptateurs de montae.
CAPOTE - Utilisez la capote de votre sièe
comme capote pour le landau.
9 Attachez les supports de la capote sur
chaque côté du cadre du sièe.
10 Attachez le Velcro® de la capote au Velcro®
du landau.
COUVRE-PIED
11 Ajustez le couvre-pied autour de la partie
inférieure du landau et attachez le Velcro® au
support de montae.
12 Attachez le couvre-pied à ce bouton-pression.
13 Alinez les adaptateurs des supports du
landau avec les supports de montae de
votre poussette. Appuyez fermement jusqu’à
ce que le landau s’enclenche en place.
SANGLES DE TRANSPORT
14 Lorsque les sanles de transport ne sont pas
utilisées, utilisez boutons-pression pour les fixer
sur le dessus du couvre-pied comme l’indique le
schéma.
ASSEMBLY INSTRUCTIONS INSTRUCTIONS POUR L’ASSEMBLAGE
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Jogger City Select LUX Pram at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Jogger City Select LUX Pram in the language / languages: All languages as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info