768596
12
Zoom out
Zoom in
Previous page
1/172
Next page
12
F
RAME
1 Unpack the pushchair frame from the
box and set the wheels aside.
Unlock the pushchair by pullin the
storae lock Lever.
2 Unfold the pushchair by pullin the
handlebar away from the frame. Then
lift the handlebar away from the seat.
The pushchair will lock into place and
you will hear a click.
3 Place the pushchair in the upriht
position.
WARNING: Ensure that all the lockin
devices are enaed before use.
FRONT WHEEL
4 Installation
Lay pushchair on its back so the
handlebar is restin on the floor.
Attach the Front Wheel by slidin
it into the front wheel mount until it
clicks. Gently pull on the Front Wheel
to make sure it is properly attached.
5 Removal
While pressin the front wheel release
button, ently slide the Front Wheel
out of the front wheel mount.
SWIVEL FEATURE
6 Push the swivel button down and
rotate to the left to lock the front wheel
assembly in a fixed position for lon
distance strollin.
7 Push the swivel button down and rotate
to the riht to allow the front wheel
assembly to swivel.
WARNING: When loadin and
unloadin child, lock the front wheel in a
fixed position. Althouh the front wheel
of your pushchair lock, it is not intended
for join or exercise purposes.
REAR WHEELS
8 Installation
Alin the rear wheel axle with the
wheel mount on the pushchair frame
and insert it into the wheel mount until
it locks into place. You will hear a click.
Gently pull on the rear wheel to make
sure it is properly attached.
9 Removal
While pressin down on the wheel
release button, ently slide the rear
wheel out of the wheel mount.
BRAKE
10 To Lock the Brakes: ently pull the Brake
Lever into upriht position until it clicks
into place.
11 To Release the Brakes: Pinch the ray
tabs and pull the lever towards you. Push
the Brake Lever down until it is parallel
with the frame.
WARNING: Lock the brakes before
loadin and unloadin your child and
whenever the pushchair is not movin.
CANOPY
12 Attach the canopy to the frame by
slidin the canopy onto one of two
mountin brackets. To remove, slide
canopy o of mounts.
NOTE: When usin a City Go/
Graco or Britax car seat, the
canopy must be in the top position.
For all other carseats, canopy must
be removed.
13 Snap the two snaps to the pushchair
frame.
14 Zip the back of the seat to the canopy
top.
Attach the 2 fastenin strips on the side
of the canopy.
15 Pull forward to open canopy and push
backwards to close canopy.
16 There are two canopy windows, a top
one and back one. To use them, roll the
shade up towards the top and secure
with the elastic and button.
HANDLE
17 To chane the handle to one of 6 use
positions, press the handle release
buttons on both sides and rotate up or
down to the new position.
ADJUSTING SAFETY HARNESS
18 From the back of the seat, unfasten and
open the pocket to locate the plastic
square stopper. Turn stopper and pass
throuh the openins in the PE board
EN
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Jogger City Mini GT 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Jogger City Mini GT 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 15,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info