768601
11
Zoom out
Zoom in
Previous page
1/148
Next page
11
FRAME
1 Unpack the pushchair frame from the
box and set the wheels aside.
Unlock the pushchair by pullin the
auto-lock lever.
2 Unfold the pushchair by pullin the
handlebar away from the frame. Then
lift the handlebar away from the seat.
The pushchair will lock into place and
you will hear a click.
3 Place the pushchair in the upriht
position.
WARNING: Ensure that all the lockin
devices are enaed before use.
FRONT WHEELS
4 Installation
Lay pushchair on its back so the
handlebar is restin on the floor.
Attach front wheels by slidin them
into the front wheel mount until it
clicks. Gently pull on the front wheel
to make sure it is properly attached.
5 Removal
While pressin the front wheel release
button, ently slide the front wheels
out of the front wheel mount.
SWIVEL FEATURE
6 Push the swivel lock button down to
lock the front wheel to a fixed position.
7 Press the swivel lock button up to allow
the front wheel assembly to swivel.
WARNING: When loadin and
unloadin child, lock the front wheel
in a fixed position. Althouh the front
wheel of your pushchair locks, it is
not intended for join or exercise
purposes.
REAR WHEELS
8 Installation
Alin the rear wheel axle with the
wheel mount on the pushchair frame
and insert it into the wheel mount until
it locks into place. You will hear a click.
Gently pull on the rear wheel to make
sure it is properly attached.
9 Removal
While pressin down on the wheel
release button, ently slide the rear
wheel out of the wheel mount.
BRAKE
10 To lock the brakes: push the brake
lever down to enae the brakes.
11 To release the brakes: lift the brake
lever up.
WARNING:Lock the brakes before
loadin and unloadin your child and
whenever the pushchair is not movin.
CANOPY
12 Attach the canopy to the frame by
slidin the canopy onto one of two
mountin brackets. To remove, slide
canopy o of mounts.
NOTE: When usin a Car Seat, canopy
must be removed.
13 Attach the fastenin strip on the back
of the canopy to the frame.
14 Pull forward to open canopy and push
backwards to close canopy.
15 There are two canopy windows, a top
one and back one. To use them, roll
the shade up towards the top and
secure with the elastic and button.
ADJUSTING SAFETY HARNESS
16 From the back of the seat, undo the
fastenin strip and open the pocket to
locate the plastic square stopper. Turn
stopper and pass throuh the openins
in the PE board and seat fabric.
17 Reinsert stopper at seat openin
closest to childs shoulders. Pass back
throuh seat fabric and PE board. Tu
on strap to ensure stopper is locked.
Repeat on both sides.
WARNING: Avoid serious injury from
fallin or slidin out. Always properly
adjust and fasten safety harness.
WARNING: Always use the crotch
strap in combination with the shoulder
straps and waist belt.
EN
NWL0000958998A City Mini 2 Double EMEA R03 FINAL.indd 11 7/10/19 1:11 PM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Jogger City Mini 2 double at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Jogger City Mini 2 double in the language / languages: All languages as an attachment in your email.

The manual is 19,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info