Manual Baby Jogger City Mini 2 Double Pram (page 7 of 52) (All languages)

768621

Zoom out

Zoom in

1/52

UNPACK

1 After unboxin the carrycot, raise the

canopy until it clicks into place, then

undo the four fastenin strips around the

canopy.

2 Then remove the mattress, and undo the

six fastenin strips around the carrycot

body to remove the liner.

3 Next, pull on the handles inside the

carrycot body to move the support bars

into position. Make sure the support bars

insert into the retainin clips until they

click into place.

Finally, reattach the liner and canopy,

then place the mattress back inside the

carrycot.

FOOT COVER

4 To attach the foot cover, place the foot

cover over the Carrycot frame.

5 Attach the fastenin strips on either side

of the carrycot body.

6 On each side of the foot cover, thread

the snap throuh the loop and close the

snaps toether to secure the foot cover

to the carrycot frame.

7 You may also fold the top of the foot

cover down and secure it usin the lower

loops.

CANOPY

8 Raise the canopy until it clicks into

position B. Continue to raise the canopy

to position A by pressin the buttons on

either side of the canopy hine.

WARNING: Before carryin or liftin,

make sure that the canopy is locked into

position A.

NOTE: The canopy has 2 locked positions.

Push and pull the handle to make sure

the canopy is in a locked position. The

canopy can be in any position when

used in the stroller.

9 To lower the canopy, press the buttons

on either side of the canopy hine then

lower the canopy.

10 To use the canopy window, unzip the

canopy zipper. Then roll the shade up

towards the top.

MOUNTING ADAPTERS

11 Make sure the elastic fabric near the

accessory mountin slots is not coverin

the slots.

12 Insert Adapter Brackets into the

correspondin mountin brackets on

your stroller/pushchair. The Adapter

Brackets are secure when they click into

place.

NOTE: Left and riht are determined by

standin in front of and facin the

stroller/pushchair and each Adapter

Bracket is labeled with an L or an R for

your convenience.

WARNING: Keep child's hands clear

when installin the adapter brackets.

13 Push the ray release button on each

adapter and pull upward to remove.

NOTE: Remove the adapter brackets before

foldin the stroller.

ATTACH TO STROLLER

14 First, recline the backrest by pinchin the

clamp behind the backrest, and slide it

down to the lowest position.

15 Pull backrest down on both sides to

match the clamp position.

NOTE: The stroller canopy MUST be

removed before attachin the carrycot.

WARNING: When makin adjustments to

the stroller seat, make sure child’s head,

arms, and les are clear of movin seat

parts and stroller frame.

16 Alin the black attachment brackets of

the Carrycot body with the mountin

adapter brackets. The Carrycot body

can only be attached rear facin. Firmly

press down on the carrycot body until

you hear it click into place. Gently pull

up on the canopy handle to ensure it is

locked in place.

17 To remove the carrycot body from

the stroller: Lift the release levers on

each side of the carrycot body and pull

upward to remove.

REMOVING THE INNER FABRIC

18 Unzip the canopy from the handle.

19 Undo the four fastenin strips around the

canopy. then remove the canopy fabric.

20 Undo the six fastenin strips around the

carrycot body to remove the liner.

CARE AND MAINTENANCE

Mattress Cover & Foot Cover:

• Remove plastic & foam inserts from the

mattress before washin.

• Machine wash separately usin a warm

entle cycle and mild deterent.

• Do not bleach.

• Do not iron.

• Do not place fabric in the dryer. Lay flat

to dry.

Carrycot Base, Canopy & Mattress Pad:

• Wipe clean usin a damp cloth.

• Do not bleach.

• Do not iron.

ENEN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Jogger City Mini 2 Double Pram in the language / languages: All languages as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Jogger City Mini 2 Double Pram Manual

Product: