768600
11
Zoom out
Zoom in
Previous page
1/147
Next page
11
EN
FRAME
1 Unpack the pushchair frame from
the box and set the wheels aside.
Unlock the pushchair by pullin the
storae lock lever.
2 Unfold the pushchair by pullin the
handlebar away from the frame.
3 The pushchair will lock into place
and you will hear a click.
WARNING: Ensure that all the
lockin devices are enaed before
use.
FRONT WHEELS
4 Installation
Lay pushchair on its back so the
handlebar is restin on the floor.
Attach the front wheel by slidin
it into the front wheel mount until
it clicks. Gently pull on the front
wheel to make sure it is properly
attached.
5 Removal
While pressin the front wheel
release button, ently slide the
front wheel out of the front wheel
mount.
SWIVEL FEATURE
6 Press the Swivel Lock button down
and slide the Swivel Lock to the left
to lock the front wheel assembly
in a fixed position for lon distance
strollin.
7 Press the Swivel Lock button
down and slide the Swivel Lock to
the riht to allow the front wheel
assembly to swivel.
WARNING: When loadin and
unloadin child, lock the front
wheels in a fixed position. Althouh
the front wheels of your pushchair
lock, it is not intended for join or
exercise purposes.
REAR WHEELS
8 Installation
Alin the rear wheel axle with the
wheel mount on the pushchair
frame and insert it into the wheel
mount until it locks into place. You
will hear a click.
Gently pull on the rear wheel to
make sure it is properly attached.
9 Removal
While pressin down on the wheel
release button, ently slide the rear
wheel out of the wheel mount.
BRAKE
10 To lock the brakes: push the brake
lever down to enae the brakes.
11 To release the brakes: lift the brake
lever up.
WARNING: Lock the brakes before
loadin and unloadin your child
and whenever the pushchair is not
movin.
CANOPY
12 Attach the canopy to the frame by
slidin the canopy onto one of two
mountin brackets. To remove, slide
canopy o of mounts.
NOTE: When usin a City Go/
Graco or Britax car seat, the
canopy must be in the top
position. For all other car seats,
canopy must be removed.
13 Snap the two snaps to the
pushchair frame.
14 Zip the back of the seat to the
canopy top.
Attach the 2 fastenin strips on the
side of the canopy.
15 Pull forward to open canopy and
push backwards to close canopy.
16 There are two canopy windows, a
top one and back one. To use them,
roll the shade up towards the top
and secure with the elastic and
button.
ADJUSTING SAFETY HARNESS
17 From the back of the seat, unfasten
and open the pocket to locate the
plastic square stopper. Turn stopper
and pass throuh the openins in the
PE board and seat fabric.
18 Reinsert stopper at seat openin
closest to childs shoulders. Pass
back throuh seat fabric and PE
board. Tu on strap to ensure
stopper is locked. Repeat on both
sides.
WARNING: Avoid serious injury from
fallin or slidin out. Always properly
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Jogger City Mini 2 - 4 wheel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Jogger City Mini 2 - 4 wheel in the language / languages: All languages as an attachment in your email.

The manual is 13,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info