768589
12
Zoom out
Zoom in
Previous page
1/148
Next page
12
EN FRAME
1 Unpack the stroller frame from the box
and set the wheels aside.
Unlock the stroller by pullin the auto-
lock lever.
2 Unfold the stroller by pullin the
handlebar away from the frame. The
stroller will lock into place and you will
hear a click.
3 Place the stroller in the upriht
position.
WARNING: Ensure that all the lockin
devices are enaed before use.
FRONT WHEEL
4 Installation
Lay stroller on its back so the
handlebar is restin on the floor.
Attach the front wheel by slidin it into
the front wheel mount until it clicks.
Gently pull on the front wheel to make
sure it is properly attached.
5 Removal
While pressin the front wheel release
button, ently slide the front wheel out
of the front wheel mount.
SWIVEL FEATURE
6 Push the swivel button down and
rotate to the left to lock the front wheel
assembly in a fixed position for lon
distance strollin.
7 Push the swivel button down and
rotate to the riht to allow the front
wheel assembly to swivel.
WARNING: When loadin and
unloadin child, lock the front wheel
in a fixed position. Althouh the
front wheel of your stroller locks, it is
not intended for join or exercise
purposes.
REAR WHEELS
8 Installation
Alin the rear wheel axle with the
wheel mount on the stroller frame and
insert it into the wheel mount until it
locks into place. You will hear a click.
Gently pull on the rear wheel to make
sure it is properly attached.
9 Removal
While pressin down on the wheel
release button, ently slide the rear
wheel out of the wheel mount.
HANDLE
10 Press the handle release buttons on
both sides and rotate up or down to
the new position.
BRAKE
11 To Lock the Brakes: ently pull the
Brake Lever into upriht position until it
clicks into place.
12 To Release the Brakes: Pinch the ray
tabs and pull the lever towards you.
Push the Brake Lever down until it is
parallel with the frame.
WARNING:Lock the brakes before
loadin and unloadin your child and
whenever the stroller is not movin.
CANOPY
13 Attach the canopy to the frame by
slidin the canopy onto one of two
mountin brackets.
NOTE: When usin a City Go/Graco or
Britax car seat, the canopy must be in
the top position. For all other carseats,
canopy must be removed.
14 Snap the two snaps to the stroller
frame.
15 Zip the back of the seat to the canopy
top. Attach the 2 fastenin strips on
teh side of the canopy.
16 Pull forward to open canopy and push
backwards to close canopy.
17 To use the canopy window, roll the
shade up towards the top and secure
with the elastic and button.
18 To use the side vents, lift the vent cover
and the manet will attach to the
canopy bow.
ADJUSTING SAFETY HARNESS
19 From the back of the seat, undo the
fastenin strip and open the pocket to
locate the plastic square stopper. Turn
stopper and pass throuh the openins
in the PE board and seat fabric.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Jogger City Elite 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Jogger City Elite 2 in the language / languages: All languages as an attachment in your email.

The manual is 17,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info