Manual Babboe Curve Mountain (page 32 of 91) (English, German, Dutch, French)

803634

Zoom out

Zoom in

1/91

ENGLISHDEUTSCHFRANÇAIS NEDERLANDS

• Battery capacity indicator

The battery capacity indicator displays an estimate of how much

capacity is left in the battery.

• Function display

The function display can display the following functions.

• Odometer

• Trip meter

• Range (Remaining assist distance)

Push the assist mode switch (down) for 1 second or longer,

the display changes as follows:

Odometer  Trip meter  Range  Odometer

You can reset the data for trip meter.

- Odometer

This displays the total distance (in kilometers or miles) ridden

while the power was on.

The odometer cannot be reset.

- Trip meter

This displays the total riding distance (in kilometers or miles) since

it was last reset. When you turn off the power, the data up to that

point will remain in the display. To reset the trip meter and begin

counting a new total, press the assist mode switch (up) and assist

mode switch (down) simultaneously for 2 seconds or longer when

the trip meter is displayed.

- Range (Remaining assist distance)

This displays an estimate of the distance (in kilometers or miles)

that can be ridden with assist on the residual battery capacity

of the battery installed. If you switch the assist mode when

the remaining assist distance is displayed, the estimate of the

distance that can be ridden with assist changes.

The remaining assist distance estimate cannot be reset.

TIP

• The remaining assist distance changes depending on the riding

situation (hills, headwind, etc.) and as the battery runs down.

• If in Off mode, “- - - -” is displayed.

- Headlight “On/Off” (Applies only to models equipped with a

headlight powered by the battery pack. The taillight, which

is powered by the battery pack, is switched on/off with the

headlight.)

2 Koplamp „Aan/Uit” (Alleen van toepassing

op modellen die zijn voorzien van een

koplamp die wordt gevoed door de accu. De

achterlamp, die wordt gevoed door de accu,

wordt met de voorlamp aan-/uitgeschakeld.)

Iedere keer dat u de lichtschakelaar indrukt, schakelt de

koplamp tussen „Aan” en „Uit”.

2 km-/mijlinstelling

Gebruik de volgende stappen om de km/mijl-instelling in

te stellen.

1. Zorg ervoor dat de weergave-eenheid wordt ingescha-

keld.

2. Selecteer de kilometertellerweergave in de functie-

weergave.

3. Druk gelijktijdig op de schakelaar hulpmodus (omhoog)

en de schakelaar hulpmodus (omlaag) en houd deze

gedurende 2 seconden of langer ingedrukt.

4. Wanneer „km” of „mile” knippert, laat de schakelaar

dan los.

5. Gebruik de hulpmodusschakelaars (omhoog en om-

laag) om „km/mile” in te stellen.

6. Wanneer de eenheid die u wilt instellen knippert, drukt

u op de Schakelaar hulpmodus (omlaag) gedurende 1

seconde of langer en u laat de schakelaar los wanneer

het display terugschakelt naar het hoofddisplay dat

wordt weergegeven tijdens het rijden.

Voor alle instellingsprocedures, moet u de fiets tot

stilstand laten komen en de vereiste instellingen uit-

voeren op een veilige plek. Anders kan een gebrek

aan aandacht voor omringend verkeer of ander gevaar

een ongeluk veroorzaken.

OPMERKING

• De instellingen kunnen niet worden aangepast tijdens

het rijden.

• Als u het volgende doet tijdens het instellen, zal de

eenheid die u aan het instellen was worden geannu-

leerd en het display zal terugkeren naar het hoofddis-

play dat tijdens het rijden wordt weergegeven.

• De zwengel (pedaal) in de rijrichting draaien

• Het achterwiel draaien wanneer u met een snelheid

van 2 km/h of meer rijdt

• Het indrukken van de drukschakelaar duwhulp

X0S7_EPAC欧州向け蘭語_MY19.indd 14 2018/04/25 10:06:05

Each time you press the light switch, the headlight switches

between “On” and “Off”.

-km/mile setting

Use the following steps to set the km/mile setting.

1. Make sure that the display unit is turned on.

2. Select the odometer display in the function display.

3. Press the assist mode switch (up) and assist mode

switch (down) simultaneously for 2 seconds or longer.

4. When either “km” or “mile” flashes, release the switch.

5. Use the assist mode switches (up & down) to set the

“km/mile”.

6. While the unit that you want to set is flashing, press the

assist mode switch (down) for 1 second or longer, and

release the switch when the display returns to the main

riding display.

For all setting procedures, be sure to stop the bicycle and perform

the required settings in a safe location. Otherwise, lack of

attention to surrounding traffic or other hazards could cause an

accident.

TIP

• The settings cannot be adjusted while riding.

• If you do the following during setting, the item that you

are setting will be canceled and the display will return

to the main riding display.

• Turning the crank (pedal) in the traveling direction

• Turning the rear wheel at 2 km/h and more

• Pushing the pushing assist switch

2 Battery capacity indicator

The battery capacity indicator displays an estimate of how

much capacity is left in the battery.

2 Function display

The function display can display the following functions.

• Odometer

• Trip meter

• Range (Remaining assist distance)

Push the assist mode switch (down) for 1 second or longer,

the display changes as follows:

Odometer → Trip meter → Range → Odometer

You can reset the data for trip meter.

7 Odometer

This displays the total distance (in kilometers or miles) rid-

den while the power was on.

The odometer cannot be reset.

7 Trip meter

This displays the total riding distance (in kilometers or

miles) since it was last reset.

When you turn off the power, the data up to that point will

remain in the display.

To reset the trip meter and begin counting a new total,

press the assist mode switch (up) and assist mode switch

(down) simultaneously for 2 seconds or longer when the

trip meter is displayed.

7 Range (Remaining assist distance)

This displays an estimate of the distance (in kilometers or

miles) that can be ridden with assist on the residual bat-

tery capacity of the battery installed. If you switch the as-

sist mode when the remaining assist distance is displayed,

the estimate of the distance that can be ridden with assist

changes.

The remaining assist distance estimate cannot be reset.

TIP

• The remaining assist distance changes depending on

the riding situation (hills, headwind, etc.) and as the

battery runs down.

• If in Off mode, “- - - -” is displayed.

Battery capacity indicator

Function display

X0S7_EPAC欧州向け英語_MY19.indd 13 2018/04/04 9:29:36

2 Headlight “On/Off” (Applies only to models

equipped with a headlight powered by the

battery pack. The taillight, which is powered

by the battery pack, is switched on/off with

the headlight.)

Each time you press the light switch, the headlight switch-

es between “On” and “Off”.

2 km/mile setting

Use the following steps to set the km/mile setting.

1. Make sure that the display unit is turned on.

2. Select the odometer display in the function display.

3. Press the assist mode switch (up) and assist mode

switch (down) simultaneously for 2 seconds or longer.

4. When either “km” or “mile” flashes, release the switch.

5. Use the assist mode switches (up & down) to set the

“km/mile”.

6. While the unit that you want to set is flashing, press the

assist mode switch (down) for 1 second or longer, and

release the switch when the display returns to the main

riding display.

WARNING

For all setting procedures, be sure to stop the bicycle

and perform the required settings in a safe location.

Otherwise, lack of attention to surrounding traffic or

other hazards could cause an accident.

TIP

• The settings cannot be adjusted while riding.

• If you do the following during setting, the item that you

are setting will be canceled and the display will return

to the main riding display.

• Turning the crank (pedal) in the traveling direction

• Turning the rear wheel at 2 km/h and more

• Pushing the pushing assist switch

X0S7_EPAC欧州向け英語_MY19.indd 14 2018/04/04 9:29:36

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Babboe Curve Mountain in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 30.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Babboe Curve Mountain Manual

Product: