64568
2
Zoom out
Zoom in
Previous page
1/2
Next page
GARANTIE: 2 JAHRE
Garantie-Einschränkungen
Nicht unter Garantie fallen Schäden infolge von:
1. Überlastung der Lautsprecher durch zu hohe oder verzerrte Verstärker-
leistung etc.
2. schädlichen Einwirkungen von übermäßiger Feuchtigkeit, Flüssigkeiten,
Hitze, Sonneneinstrahlung oder übermäßiger Verschmutzung.
3. mechanischer Beschädigung durch Unfall, Fall oder Stoss; Schäden
durch nicht autorisierte Reparaturversuche oder nicht durch den Hersteller
ausdrücklich autorisierte Modifikationen.
Die Garantie dieses Produkts bleibt in jedem Fall auf die Reparatur bzw. den
Ersatz (Entscheidung beim Hersteller) des jeweiligen EMPHASER-Produkts
beschränkt. Scden durch unsachgemäße Verpackung oder Transportschäden
werden nicht durch diese Garantie gedeckt. Jeder über diese Garantie-Erklä-
rung hinausgehende Anspruch und jede Haftung für direkte oder indirekte
Folgeschäden werden ausdrücklich abgelehnt.
LIMITED WARRANTY: 24 MONTHS
Warranty Limitations
This warranty does not cover any damage due to:
1. Speaker overload due to excessive or distorted amplifier power etc.
2. Exposure to excessive humidity, fluids, heat, direct sunrays or excessive
dirt or dust.
3. Accidents or abuse, unauthorized repair attempts and modifications
not explicitly authorized by the manufacturer
This warranty is limited to the repair or the replacement of the defective
product at the manufacturer´s option and does not include any other form
of damage, whether incidential, consequential or otherwise.
This warranty will not cover any loss during transportation, transport costs or
any other damage caused by transport or shipment of the product.

Thank you and congratulations on your purchase of this high quality AXTON
AB trunk box subwoofer system.
Please read and follow the installation and operating instructions listed
below carefully, to obtain best possible sound quality and performance of
this car audio component. Keep this manaual for future reference.
All AB trunk boxes are manufactured using high density 19 mm MDF. The
enclosures are lightweight but very robust. An extremely durable carpet
is protecting the boxes against daily wear. Rounded ports with more
than sufficient opening cross-sections are featured too, reassuring a
completely port-noise free operation of the AB subs, even under highest
amplifier loads.

Your AB trunkbox subwoofer is designed to be placed in the trunk com-
partment of your car.
AB subwoofers can also be used in vehicles with completely sealed trunk
compartments, for example sedan cars, where no apparent passage to
the car's passenger compartment is visible. The desired bass pressure
is then built up via the car's ventilation channels in the trunk. In such a
case, the driving amplifier gain must be set slightly higher to obtain the
same amount of perceived bass volume, and in addition the subwoofer
will render a slightly lower max. dB value, compared to subs playing in
hatch-back type cars.
The AB sub should be placed in the trunk of your car, with its angled back-
side against the rear dividing wall or behind the backseats. If necessary,
you can additionally secure your trunk box with “antislip” corners, or fix
if with belt straps.
Make sure, the lowpass function of the amp channels driving your sub
is activated. For best sound quality, a lowpass slope steepness of either
12dB, or better 18dB/oct. is recommended. The transmission range of
the AB trunk boxes lies between 20 to 90Hz.

The first thing to be set, is the correct connection polarity of your
subwoofer, to achieve acoustical "in-phase" response between the AB
subwoofer and the front- and rear satellite speakers. Before you attempt
to adjust the lowpass frequency or polarity of your sub, you must set
all tone controls - like treble, bass and loudness of your headunit - to
their neutral or zero position!
Now connect the speaker wire coming from the amplifier to the
subwoofer’s terminal binding posts, located on the backside of the
subwoofer cabinet. Set the lowpass crossover frequency of your amp dri-
ving the sub to approx. 80Hz (a little higher is better than too low!).

The acoustically correct connection is easily found by reversing the
polarity of the speaker wire connected to the terminal. Listen to the
changes of the sound in the upper bass range, when the sub is con-
nected either in phase, or with reversed polarity. This step is absolutely
crucial! One of the two polarity connections will render more bass, or
a more precise bass.
A subwoofer playing out of phase sounds slow and imprecise, so
this is the most important check to be carried out during the setup
procedure.


The fine tuning of the lowpass crossover frequency on your amplifier
has a big influence on the general sound reproduction quality of your
subwoofer model. Please note that, selecting a crossover frequency
too low, will give you a muddy and infra-bass heavy sound without
punch. On the other hand, setting the lowpass crossover point too high,
renders a very hard and droning bass sound. So take your time for this
adjustment and try several crossover frequency points, to determine
the best sounding one, it’s well worth the time invested!
AB20
.
AB25
.
AB30
.
AB230
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axton AB30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axton AB30 in the language / languages: English, German as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info