67658
14
Zoom out
Zoom in
Previous page
1/20
Next page
– 14 – – 15 –
3. MOUNTING OF THE ACTIVE SUB
Attention! For your own safety, disconnect the positive battery terminal (+12V) or remove
the main fuse in the positive power cable near the car battery, before you start any wiring
work!
The mounting location should be carefully selected, and in the interest of passive driver and
passenger safety, this active subwoofer must be securely mounted.
Once the location where the active subwoofer will be mounted is clear, use the unit as a
template for the marking of the mounting holes with pencil or felt-tip marker. The mounting
holes should be pilot-drilled, using a 2,5mm or 3mm drill bit.
4. CABLE ROUTING AND WIRING
4.1 MAIN POWER WIRES
Use power cables with at least 10mm² cross section. Run the positive main power cable
(„+12 V“) directly from the positive terminal of the car battery to the AB20A. For protection
of your car audio system against electrical fire hazards, resulting from a short-circuit of the
main power cable to chassis ground, a main fuse holder must be inserted within the first
30 cm of the positive main power cable. The applicable fuse value must be matched to the
limitations of your main power cable AND the current draw of the amp-module – therefore
choose an appropriate fuse value, but no less than 30A.
1.
2.
AB20A Manual D+E.indd 14 04.08.2006 15:57:34 Uhr
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axton AB20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axton AB20 in the language / languages: English, German as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Axton AB20

Axton AB20 User Manual - English, German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info