65067
30
Zoom out
Zoom in
Previous page
1/52
Next page
30
30
reproduction anyway - will only be playing in the midbass and mid/
high frequency range. This so-called highpass filtered or HPF amplifi-
cation mode also puts less electrical and mechanical 'strain' on your
coaxials and component speaker systems, resulting in an increased
power-handling capacity.
In LOWPASS mode the respective speaker output will only receive
low-pass filtered (LPF) signals resulting in the subwoofer only playing
in the low-end bass frequency range without any unwanted 'smearing'
into the mid/high frequencies.



Before you can effect the respective input sensitivity / level adjustments
(GAIN) you first have to select the system appropriate crossover fre-
quencies for all speakers connected by way of the respective filtering
controls marked HIGHPASS and LOWPASS (depending on amplifier
model). 
 rather than by guessing a frequency value!

 Any frequency setting
on the filtering controls will be inactive if the amplification mode switch
remains in position FULL!




The "Loudness" function should also be deactivated.


Depending on amplifier type (mono, 2-channel, 4-channel or a com-
bination thereof), amplification mode (fullrange, highpass or lowpass)
and connecting mode (stereo or mono bridged) it is possible, that only
part of the adjustments described in this manual section are applicable
to your individual car audio system.
If you are using your amplifier in conventional fullrange mode (eg. with a
soundboard), you may skip paragraph "1. Crossover Frequency Settings"
and go directly to "2. Sensitivity Adjustments".
In case you are using your new amplifier(s) in a multi-channel amplifier
system with highpass-filtered front and/or rear satellites and/or a
lowpass-filtered subwoofer, we recommend you to read the complete
section "Controls & Adjustments" before you start adjusting any of the
frequency or level controls.
However, it is recommended to keep to the practical and logical se-
quence of the frequency and level adjustments as described in this
manual section.

The AXTON models A1500, A2150 and A485 do not only offer conven-
tional fullrange amplification: You also have the choice of highpass or
lowpass amplification mode, enabling you to drive your car audio speakers
in the specific frequency range where they will perform best.
In HIGHPASS mode, the dashboard, door and rear shelf speakers (usually
between10 and 16 cm diameter) - which do not give you strong bass
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axton A2150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axton A2150 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info