767995
11
Zoom out
Zoom in
Previous page
1/75
Next page
5
Check the belt position in relation to the child. The belt position should be just above the
child´s shoulders. Check this regularly as your child grows. If needed, adjust the belt position
according to steps 2-7.
Create slack on the belt by using the harness adjustment button (M) and pulling the shoulder
Belt (P) at the same time.
Open the harness by pushing the belt buckle button (N) and separating the two connectors.
Open the shoulder pads (O) and pull out the belt with connectors and the shoulder pad strap
through the belt openings (V).
If needed, add the baby insert and cushion (J, K). We recommend using the insert and cushions
if your child is approximately between 0-3 months to ensure an appropriate fit.
Now you can put the shoulder belts and shoulder pad strap in a dierent opening (V) that better
suits your child’s height. To reach the highest belt position, flip open the ASIP bar cover (G).
Close the shoulder pads (O) around belts and attach the connectors into the belt buckle (N).
Make sure that the belts are not twisted.
IMPORTANT: Make sure that the belts are not twisted.
Adjusting the baby car seat to fit your child
1
2
3
4
5
6
7
Buckle your child in the seat
Put the baby car seat on a flat surface. Hold down the belt adjustment button (M) and at the
same time pull the shoulder section of the harness (P) until it is fully pulled out. Fold away the
harness (P) so that they will be easy to reach after you have placed your child in the baby car
seat. Place your child in the baby car seat. Make sure there are no blankets or thick clothing
between the child and the back of the baby car seat.
Place the shoulder belts over your child’s shoulders, as close to the neck as possible.
Lock the harness (P) by pushing the two connectors together and then insert them into the
belt buckle (N).
Pull the belt adjustment strap (L) to tighten the harness (P).
There should be approximately 1 cm of space between the child’s shoulders and the belt.
8
9
10
11
12
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axkid Modukid Infant at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axkid Modukid Infant in the language / languages: English, German, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info