Manual Axkid Duofix ISOFIX (page 9 of 85) (English, German, Portuguese, Swedish, Spanish)

768006

Zoom out

Zoom in

1/85

The easiest way to lift the Duox into the vehicle is with its back rst. Place the child restraint in the vehicle with

the back of the restraint facing the front of the vehicle.

The heels (Y) should be sitting over the edge of the vehicle seat. The indented vertical line (T) on the heel

should align vertically with the end of the vehicle’s seat. If installing in a small vehicle, or if your child does not

require extra leg room, you can instead place the heel upon the vehicle’s seat this will also achieve a more

reclined position.

Note: When installing Duox in the front seat it is possible, but not crucial, for the back of the restraint to have contact

with the dashboard.

To adjust the angle of the child restraint, press the recline adjustment lever (K) to select one of the three

reclining positions. Always choose the most upright position as possible, however your child must be able

to hold their head up on its own, and there should be enough recline to ensure your child’s head does not fall

forward when sleeping. The rule of thumb is that the older the child grows, the more upright the seat can be installed.

Please note that once the installation of the Duox is complete, it will be somewhat more reclined as it sinks into the

vehicle’s seat from tightening seat belts and tether straps.

Positioning The Child Restraint

Rear-Facing 9-25Kg With Seat Belt & Tethers

The headrest on your Duox is equipped with a head support brake. This can be used if you want to keep the

headrest in a xed position. To activate the head support brake, pull the harness adjustment strap until the

headrest is at the desired height, you will hear a faint “click” sound from the headrest as it locks into position.

Check that the headrest can not be pulled down any further and activate the headrest brake by moving the lever (i)

across to the right.

WARNING: Do not pull up the headrest with the parking brake activated.

Placing Your Child In The Seat

Head Support Brake On Headrest

Press the harness adjuster button (I) and pull forward on the shoulder straps (not the shoulder pads) to

completely loosen the harness.

Press the red harness release button on the buckle and unfasten the harness.

Place your child in the car seat. Put your child’s arms in between the shoulder straps so that the straps are

hanging over the chest and stomach.

Pull the shoulder straps together and insert the harness tongues into the crotch buckle.

Pull the harness adjustment strap (J). It’s important that you always pull the harness straight and central when

you tighten the adjustment strap. This will tighten the harness and the headrest will automatically slide down

to the appropriate height.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Axkid Duofix ISOFIX in the language / languages: English, German, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Axkid Duofix ISOFIX Manual

Product: