613439

Axis P3346 Manual

18
Zoom out
Zoom in
Previous page
1/68
Next page
18
AXIS P33 Series - Video & Audio
Contrast - Adjust the contrast of the image by raising or lowering the value in this field.
White balance
This is used to compensate for the different colors present in different light sources, to make the colors in the image appear
the same. The network camera can be set to automatically identify the light source and compensate for its color. Alternatively,
the type of light source can be manually selected from the drop-down list. See the online help files
for a description of
each available setting.
Wide Dynamic Range
Wide dynamic range improves the exposure when there is a considerable contrast between light and dark areas in an image.
Note: Wide dynamic range is only possible when the Exposure control setting is set to Automatic.
Exposure Settings
Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth
considerations.
Exposure value - Use this slidebar to fine tune the exposure. Increasing the exposure will improve image quality at the
expense of the total frame rate. There may also be an increase in motion blur.
Exposure control - Set to Automatic for optimal exposure settings automatically, for example brightness and noise.
Flicker-free 50 or 60 Hz is used to remove flicker which can be caused by fluorescent and other light sources. The Hold
current option locks the current exposure settings.
Enable Backlight compensation - Backlight compensation makes the subject appear clearer when the image background is
too bright, or the subject too dark.
Exposure zones - This setting determines which part of the image is used to calculate the exposure. The Auto setting can be
used in most situations, but for particular requirements, select Defined and click the Edit button to open the Exposure
Windows dialog to custom define the exposure zone.
IR cut filter - Set this filter to Off to allow the camera to 'see' infrared light, making the image clearer in low light
conditions, e.g. at night or if using an infrared lamp. If set to Auto, the camera will automatically switch between IR cut filter
On and Off, according to the current lighting conditions. Note that if this IR cut filter is set to Off, the image is in black and
white.
Exposure priority - This defines the balance between image quality and the frame rate. When Motion is prioritized, motion
blur is minimized, but the image quality may be reduced with a higher frame rate. A prioritized Low noise will provide better
image quality with a lower frame rate.
Shutter - A smaller value means less motion blur, but requires a well lit scene. A larger value will allow more light in the
camera so that even a low lit scene can produce a good image, but at the expense of increased motion blur.
Gain - A lower value means less noise; in dark situations this can lead to a very dark image. A larger value means more
amplification making it possible to observe a dark scene, but with increased noise. When Motion is prioritized the shutter
time is kept as low as possible. When Low noise is prioritized the gain is kept as low as possible. Setting min/max to the same
values is equivalent to setting a fixed value.
Enable automatic iris adjustment - This should always be set to Enabled, except during focusing, or when using a fixed iris
lens.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis P3346 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis P3346 in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info