613438
30
Zoom out
Zoom in
Previous page
1/68
Next page
30
AXIS P33 Series - Events
Triggered Event
A triggered event could be activated by:
a manually activated action, such as from an action button in the web interface
detected movement in a configured motion detection window
on restart (reboot), after power loss
camera tampering
input ports
IR cut filter
•audio
full disk
fan malfunction
application trigger
•temperature
pan tilt zoom
How to set up a triggered event
The following example describes how to set up the camera to upload images when the main door is opened.
1. Click Add triggered... on the Event Types page. The Triggered Event Type Setup page appears.
2. Enter a descriptive Name for the event, such as Motion Detection. To configure motion detection see page 33.
3. Set the Priority - High, Normal or Low (see the online help).
4. Set the Respond to Trigger... parameters to define when the event is active, for example, after office hours.
5. Select the trigger alternative from the Triggered by... drop-down list.
6. Set the When Triggered... parameters, that is what the camera will do if motion is detected; this could be uploading
images to an FTP server or sending an e-mail notification.
7. Click OK to save the event in the Event Types list.
Please see the online help for information on the different options.
Note: Up to 10 event types can be configured in the camera, and up to three of these can be configured to upload images.
File names can be formatted according to specific requirements. See File Naming & Date/Time Formats in the online
help .
Pre-trigger and Post-trigger buffers
This function is useful when checking to see what happened immediately before and/or after a trigger, for example, 30
seconds before and/or after a door was opened.
In the Event Types page, select Add Triggered... and The Triggered Event Type Setup dialog appears. Check the Save stream
checkbox option under When Triggered... to view the options. All uploaded images are JPEG images.
Include pre-trigger buffer - images stored internally in the server from the time immediately preceding the trigger. Check the
box option to enable the pre-trigger buffer, enter the desired length of time and specify the required image frequency.
Include post-trigger buffer - contains images from the time immediately after the trigger. Configure as for pre-trigger.
Notes:
Pre-trigger and Post-trigger buffers will be lost if the connection to the event server fails.
The maximum length of the pre-/post-buffer depends on the video image size and selected frame rate.
If the pre- or post-buffer is too large for the camera’s internal memory, the frame rate is reduced and no image will be
uploaded. If this occurs, an entry is created in the unit's log file.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis P3344 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis P3344 in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info