613437
44
Zoom out
Zoom in
Previous page
1/68
Next page
44
AXIS P33 Series - System Options
Storage - Disk Management
Disk Management is used to setup and manage local storage devices. Local storage can be used to save video streams from
triggered, scheduled or continuous recordings. For information on how to use the local storage with Triggered and Scheduled
Event Type Setup and Continuous Recordings see the online help
.
Storage Device
Once a formatted SD card has been inserted in the SD memory card slot, it is automatically mounted and information such as
the available space and the size of the storage device is shown. The disk is full when there is less than 1000KB of space left on
the memory card.
The memory card must be formatted to be mountable. Mounting is done automatically when a new memory card is inserted,
or when the system boots. The only time you need to do a manual mount, is when you have executed an unmount command
and the memory card has not been ejected and reinserted.
Status shows as follows:
OK - The storage device is mounted and working correctly
connected - The storage device is present but not mounted
disconnected - The storage device is not present.
failed - A problem has been discovered.
If the status shows as failed, click Check disk to see if the problem can be found and then try Repair. As a final measure the
storage device might need to be reformatted. If there is important data on the storage device, see Troubleshooting, on page
50.
Disks are normally preformatted when purchased, but if for whatever reason you need to...click the Format button to format
the disk. Any previous data stored on the disk will be lost.
Read only shows the status of write-protect tab on the memory card. The status no means the tab is in the write-enabled
mode and recordings can be saved to the memory card. The status yes means the memory card's tab is in the
write-protected/read-only position, or there is a system error and recordings cannot be saved to the memory card.
Important!
To prevent loss of data, click Unmount before removing a storage device.
Storage Device Settings
Storage Device Settings is used to configure removal of recorded video.
Automatic disk cleanup
To avoid filling up local storage, Automatic disk cleanup can be set to continually remove older recordings to create more
space.
Once enabled, automatic disk cleanup can be set to remove recordings that are older than a set number of days or weeks and
when a percentage of the disk is full. For longer or continuous recordings, the oldest part of the recording is removed, it is
recommended to have a time and date overlay in the video for proper tracking of recordings. See Text Overlay Settings, on
page 14.
Note:
For continuous recording to work properly, do not set the limit to more than 95% full.
Interrupted recordings with an Unknown status, partial recordings and any other recording that has not been removed by disk
cleanup can be removed manually from the Recording List using the Remove button.
Check Lock disk to stop writing to the disk and protect recordings from being removed. A locked disk cannot be formatted.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis P3343 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis P3343 in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info