613437
39
Zoom out
Zoom in
Previous page
1/68
Next page
39
AXIS P33 Series - System Options
Network
Basic TCP/IP Settings
Your Axis network camera supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at
least one version must always be enabled. When using IPv4, the IP address for the camera can be set automatically via DHCP,
or a static IP address can be set manually. If IPv6 is enabled, the network cameras receive an IP address according to the
configuration in the network router. There are also options for using AVHS (AXIS Video Hosting System) and AXIS Internet
Dynamic DNS Service. For more information on setting the IP address, see the online help
.
Network Settings - Click the View button for an overview of the IP configuration of the network camera.
IPv4 Address Configuration - Check the Enable IPv4 box option to enable IPv4.
Obtain IP address via DHCP - Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators
centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP
server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a
particular MAC address.
Note:
DHCP should only be enabled if your DHCP server can update a DNS server, which then allows you to access the Net-
work Camera by name (host name). If DHCP is enabled and you cannot access the unit, run AXIS IP Utility to search
the network for connected Axis products or reset the network camera to factory default settings and then perform the
installation again.
Use the following IP address - To use a static IP address for the Network Camera, check the radio button and then make
the following settings:
IP address - Specify a unique IP address for your Network Camera. (To check if the IP address you intend to use is
available or not, click the Test button)
Subnet mask - Specify the mask for the subnet the Network Camera is located on
Default router - Specify the IP address of the default router (gateway) used for connecting devices attached to differ-
ent networks and network segments.
IPv6 Address Configuration - Check the Enable IPv6 box option to enable IPv6. Other settings for IPv6 are configured in
the network router.
Services
Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which associates the unit's
MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional resetting of the
IP address.
Notes:
The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set.
In order to reset the IP address, the camera must be restarted to activate ARP/Ping for an additional two minutes.
Pinging the unit is still possible when this service is disabled.
AXIS Video Hosting System (AVHS)
AVHS used in conjunction with an AVHS service provides easy and secure Internet access to live and recorded video accessible
from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/products/avhs
Enable AVHS - Enabled by default; if AVHS is not to be used this option can be disabled.
One-click enabled - Press the camera’s control button (see Hardware overview, on page 6) to connect to an AVHS service
over the Internet. Once registered, Always will be enabled and the camera will stay connected to the AVHS service. If the
camera is not registered within 24 hours from when the button was pressed, the camera will disconnect from the AVHS
service.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis P3343 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis P3343 in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info