613437
23
Zoom out
Zoom in
Previous page
1/68
Next page
23
AXIS P33 Series - Video & Audio
Audio Settings
Audio Channels
The Audio mode that you select determines the type of audio transmission. The available options are:
Full duplex - Simultaneous two-way audio allowing you to transmit and receive audio (talk and listen) at the same time.
Note: There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker.
Half duplex - Non-simultaneous two-way audio. Half-duplex mode sends and receives audio in both directions, but only in
one direction at a time.
Simplex - Network Camera speaker only - The speaker connected to the network camera will play audio transmitted from
any web client. This could be used, for example, to provide spoken instructions to a person seen in the network camera. This
mode requires you to use the push-to-talk button.
Simplex - Network Camera microphone only - transmits audio from the network camera to any web client. This can be used
in remote monitoring, and web attractions, to provide live audio from a monitored situation.
Audio Input
Source - Select Microphone for an external microphone or Line for a Line in device, e.g. an audio mixer for multiple
microphones, or a microphone with a built-in amplifier.
Enable microphone power - Microphone power should only be used with electric microphones that have no battery and when
using the internal microphone. This setting should not be enabled when using a dynamic or battery powered microphone.
Input gain - Volume control of the audio input.
Encoding - Select the digital audio encoding format to use.
Sample rate - Select the required sample rate (the number of times per second the sound is sampled). The higher the sample
rate (and the better the audio quality), the greater would be the bandwidth required.
Bit rate - Depending on the selected encoding, set the required bit rate (audio quality). The higher the bit rate, the greater the
bandwidth required.
Alarm level - Event types in the network camera can be set to use this level as a trigger. Each individual event type can be
configured to trigger if the sound level rises above or falls below the set value. The alarm level can be set in the range
0-100%, where 0% is the most sensitive and 100% the least sensitive.
Audio Output
Output gain - Volume control of the line audio output. The output can be used with high impedance headphones or
connected to another amplifier with speakers.
Click Save to save your settings, or click Reset to return to the previous settings.
Audio Clips
Audio clips can be played when an event occurs or manually from the Live View page. Audio clips are created either by
recording sound using the camera's microphone or by uploading a sound file to the camera. Audio clips that have been added
to the network camera are listed in the Audio Clip List page. You can add new clips, play, download, modify and remove clips.
Refer to the online help
for further information.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis P3343 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis P3343 in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info