Manual Axis P1354 Network Camera (page 8 of 72) (English, German, French, Italian, Spanish)

585912

Zoom out

Zoom in

1/72

Page 8 AXIS P1353/P1354 Installation Guide

Adjust zoom and focus

To adjust the zoom and focus follow these instructions:

1. Open the product’s home page and go to Setup > Basic Setup > Focus.

2. Under the Basic tab, click Open iris. If the button is inactive, the iris is already open.

3. If focus has been set before, click Reset to reset the back focus.

4. Loosen the zoom and focus pullers on the lens by turning them anti-clockwise. Move the pullers

to set zoom and focus and check the quality of the image in the image window.

Note:

If the camera is mounted so that one cannot look at the image and move the pullers at the same

time, use the Focus Assistant instead. See page 9.

5. Retighten the zoom and focus pullers.

6. On the Focus page, click Fine-tune focus automatically and wait until the automatic

fine-tuning is completed.

7. Click Enable iris. If the button is inactive, the iris has already been enabled.

8. If needed, make further adjustments under the Advanced tab. See the online help or User

Manual for more information.

Notes:

• Set focus as precisely as possible with the focus puller or Focus Assistant before starting the automatic

fine-tuning. Using the focus puller normally gives the best result.

• The iris should always be opened to its maximum while focusing; this gives the smallest depth of field

and thus the best conditions for correct focusing.

Zoom puller

Focus puller

Control button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Axis P1354 Network Camera in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Axis P1354 Network Camera Manual

Product: