460819

Axis IP-Surveillance system Manual

36
Zoom out
Zoom in
Previous page
1/50
Next page
36
Figure 5.3.a. Making recording settings using AXIS Camera Station.
For each camera, you can specify the image settings (streaming format, quality, frame rate and size) to
be used for recording. The settings will affect the amount of bandwidth used, as well as the amount of
storage space required.
For recordings triggered by video motion detection, AXIS Camera Station uses the Axis network camera/
encoder’s built-in motion detection functionality. This reduces bandwidth usage and processing load on
the server. (More about video motion detection is covered in Chapter 6.) With recordings triggered by
external inputs/outputs (I/O triggered recording), simply define the alarm trigger for the selected camera(s)
that will record when the alarm is triggered. The length of the pre- and post-alarm image buffers can be
set by defining the number of seconds the camera/encoder should record before and after an alarm is
triggered. The image buffers help to provide a more comprehensive picture of an event. Recording only
when motion or alarm is detected will save hard disk space compared with continuous recording.
The AXIS Camera Station’s background service automatically starts running upon system start-up. When
the background service is running, recording will continue even after a user has logged out from the PC
where AXIS Camera Station is installed.
Event handling
AXIS Camera Station has an event handler that is built into the recording engine. It allows you to con-
figure the actions to be taken when defined events are triggered. Triggers in AXIS Camera Station are
classified under two categories: video motion detection and input/output.
Video motion detection is triggered when an Axis camera/video encoder detects motion within its defined
viewing area. The detection is performed by the Axis camera/video encoder so there is no processing load
on the AXIS Camera Station server. (More about video motion detection is covered in Chapter 6.)
5.4.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis IP-Surveillance system at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis IP-Surveillance system in the language / languages: English as an attachment in your email.

The manual is 13,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info