603140
9
Zoom out
Zoom in
Previous page
1/16
Next page
INSTALLATION GUIDE
AXIS F34 Main Unit
Legal Considerations
Video surveillance can be prohibited by
laws that vary from country to country.
Check the laws in your local region
before using this product for
surveillance purposes.
This product includes one (1) H.264
decoder license. To purchase further
licenses, contact your reseller.
Liability
Every care has been taken in the
preparation of this document. Please
inform your local Axis office of any
inaccuracies or omissions. Axis
Communications AB cannot be held
responsible for any technical or
typographical errors and reserves the
right to make changes to the product
and manuals without prior notice. Axis
Communications AB makes no
warranty of any kind with regard to the
material contained within this
document, including, but not limited
to, the implied warranties of
merchantability and fitness for a
particular purpose. Axis
Communications AB shall not be liable
nor responsible for incidental or
consequential damages in connection
with the furnishing, performance or use
of this material. This product is only to
be used for its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights
relating to technology embodied in the
product described in this document. In
particular, and without limitation,
these intellectual property rights may
include one or more of the patents
listed at http://www.axis.com/
patent.htm and one or more additional
patents or pending patent applications
in the US and other countries.
This product contains licensed third-
party software. See the menu item
“About” in the product’s user interface
for more information.
This product contains source code
copyright Apple Computer, Inc., under
the terms of Apple Public Source
License 2.0 (see
www.opensource.apple.com/apsl). The
source code is available from
developer.apple.com/darwin/projects/
bonjour/
Equipment Modifications
This equipment must be installed and
used in strict accordance with the
instructions given in the user
documentation. This equipment
contains no user-serviceable
components. Unauthorized equipment
changes or modifications will
invalidate all applicable regulatory
certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX,
ARTPEC and VAPIX are registered
trademarks or trademark applications
of Axis AB in various jurisdictions. All
other company names and products are
trademarks or registered trademarks of
their respective companies.
Apple, Boa, Apache, Bonjour, Ethernet,
Internet Explorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW
are registered trademarks of the
respective holders. Java and all Java-
based trademarks and logos are
trademarks or registered trademarks of
Oracle and/or its affiliates. UPnPTM is a
certification mark of the UPnPTM
Implementers Corporation.
SD, SDHC and SDXC are trademarks or
registered trademarks of SD-3C, LLC in
the United States, other countries or
both. Also, miniSD, microSD, miniSDHC,
microSDHC, microSDXC are all
trademarks or registered trademarks of
SD-3C, LLC in the United States, other
countries or both.
Regulatory Information
Europe
This product complies with the
applicable CE marking directives
and harmonized standards:
• Electromagnetic Compatibility (EMC)
Directive 2004/108/EC. See
Electromagnetic Compatibility (EMC).
• Low Voltage (LVD) Directive 2006/95/
EC. See Safety.
• Restrictions of Hazardous Substances
(RoHS) Directive 2011/65/EU. See
Disposal and Recycling.
A copy of the original declaration of
conformity may be obtained from Axis
Communications AB. See Contact
Information.
Electromagnetic Compatibility
(EMC)
This equipment has been designed and
tested to fulfill applicable standards
for:
• Radio frequency emission when
installed according to the
instructions and used in its intended
environment.
• Immunity to electrical and
electromagnetic phenomena when
installed according to the
instructions and used in its intended
environment.
USA
Using an unshielded network cable
(UTP) – This equipment has
been tested using an unshielded
network cable (UTP) and found to
comply with the limits for a Class A
digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, may cause
harmful interference to radio
communications. Operation of this
equipment in a residential area is likely
to cause harmful interference in which
case the user will be required to correct
the interference at his own expense.
This equipment has been tested using a
shielded network cable (STP)
and found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult the dealer or an experienced
radio/TV technician for help.
The product shall be connected using a
shielded network cable (STP)
that is properly grounded.
Canada
This digital apparatus complies with
CAN ICES-3 (Class B). The product
shall be connected using a shielded
network cable (STP) that is properly
grounded.
Cet appareil numérique est conforme à
la norme CAN NMB-3 (classe B).
Le produit doit être connecté à l'aide
d'un câble réseau blindé (STP) qui
est correctement mis à la terre.
Europe
This digital equipment fulfills the
requirements for RF emission
according to the Class B limit of EN
55022. The product shall be connected
using a shielded network cable (STP)
that is properly grounded.
This product fulfills the requirements
for immunity according to EN 61000-
6-1 residential, commercial and light-
industrial environments.
This product fulfills the requirements
for immunity according to
EN 61000-6-2 industrial environments.
This product fulfills the requirements
This product fulfills the requirements
for immunity according to EN 55024
residential and commercial
environments.
Australia/New Zealand
This digital equipment fulfills the
requirements for RF emission
according to the Class B limit of AS/
NZS CISPR 22. The product shall
be connected using a shielded network
cable (STP) that is properly
grounded.
Korea
Korea - ࢇ̛̛Еɼࢽࡈ%̗ࢷ࢕ળࢶଢ̛̛Ի۰
࣯Իɼࢽ߾۰یࡈଜЕʨࡶּࢶࡳԻଜֲֻҘ
एࠇ߾۰یࡈଟܹ࢑ݡТЬ
Japan
Safety
This product complies with IEC/EN/UL
60950-1. Safety of Information
Technology Equipment. The product
shall be grounded either through a
shielded network cable (STP) or other
appropriate method.
The power supply used with this
product shall fulfill the requirements
for Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS) according
to IEC/EN/UL 60950-1.
Disposal and Recycling
When this product has reached the end
of its useful life, dispose of it according
to local raws and regulations. For
information about your nearest
designated collection point, contact
your local authority responsible for
waste disposal. In accordance with
local legislation, penalties may be
applicable for incorrect disposal of this
waste.
Europe
This symbol means that the
product shall not be disposed
of together with household
or commercial waste.
Directive 2012/19/EU on
waste electrical and electronic
equipment (WEEE) is applicable in the
European Union member states. To
prevent potential harm to human
health and the environment, the
product must be disposed of in an
approved and environmentally safe
recycling process. For information
about your nearest designated
Japan - B
collection point, contact your local
authority responsible for waste
disposal. Businesses should contact the
product supplier for information about
how to dispose of this product
correctly.
This product complies with the
requirements of Directive 2011/65/EU
on the restriction of the use of certain
hazardous substances in electrical and
electronic equipment (RoHS).
China
This product complies with the
requirements of the legislative
act Administration on the
Control of Pollution Caused by
Electronic Information Products
(ACPEIP).
Contact Information
Axis Communications AB
Emdalavägen 14
22369Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
Support
Should you require any technical
assistance, please contact your Axis
reseller. If your questions cannot be
answered immediately, your reseller
will forward your queries through the
appropriate channels to ensure a rapid
response. If you are connected to the
Internet, you can:
• download user documentation and
software updates
• find answers to resolved problems in
the FAQ database. Search by product,
category, or phrase
• report problems to Axis support staff
by logging in to your private support
area
• chat with Axis support staff (selected
countries only)
• visit Axis Support at www.axis.com/
techsup/
Should you require any technical
assistance, please contact appropriate
channels according to your AVHS
license agreement to ensure a rapid
response.
Learn More!
Visit Axis learning center
www.axis.com/academy/ for useful
trainings, webinars, tutorials and
guides.
Warranty
English
Safeguards
Please read through this Installation
Guide carefully before installing the
Axis product. Keep the Installation
Guide for further reference.
• Store the Axis product in a dry and
ventilated environment.
• Avoid exposing the Axis product to
vibration, shocks or heavy pressure.
Do not install the product on
unstable brackets, unstable or
vibrating surfaces or walls, since this
could cause damage to the product.
• Only use applicable tools when
installing the Axis product; excessive
force could cause damage to the
product.
• Do not use chemicals, caustic agents,
or aerosol cleaners. Use a damp cloth
for cleaning.
• Use only accessories that comply
www.axis.com/warranty
with technical specification of the
product. These can be provided by
Axis or a third party.
• Use only spare parts provided by or
recommended by Axis.
• Do not attempt to repair the product
by yourself, contact Axis or your Axis
reseller for service matters.
• This Axis product shall be used in
compliance with local laws and
regulations.
Battery Replacement
The Axis product uses a 3.0 V BR/
CR2032 lithium battery as the power
supply for its internal real-time clock
(RTC). Under normal conditions this
battery will last for a minimum of five
years. Low battery power affects the
operation of the RTC, causing it to reset
at every power-up. When the battery
needs replacing, a log message will
appear in the product’s server report.
For more information about the server
report, see the product´s setup pages or
contact Axis support.
The battery should not be replaced
unless required, but if the battery does
need replacing, contact Axis support at
www.axis.com/techsup for assistance.
• Dispose of used batteries according
to the manufacturer's instructions.
• Risk of explosion if battery is
incorrectly replaced.
• Replace only with the same or
equivalent battery, as recommended
by the manufacturer.
Français
Mesures de sécurité
Lisez attentivement le présent Guide
d'installation avant d'installer le
produit Axis. Conservez le Guide
d'installation pour une utilisation
ultérieure.
• Conservez le produit Axis dans un
environnement sec et aéré.
• Évitez d'exposer le produit Axis aux
vibrations, aux chocs ou à une forte
pression. N'installez pas le produit
sur un support instable, ou des
surfaces ou des murs instables ou
vibrants, car cela pourrait
l'endommager.
• N'utilisez que les outils applicables
pour installer le produit Axis ; une
force excessive pourrait endommager
le produit.
• Pour le nettoyage, n’utilisez ni
produits chimiques, ni substances
caustiques ou aérosols. Utilisez un
chiffon humide pour le nettoyage.
• N’utilisez que des accessoires
conformes aux caractéristiques
techniques du produit. Ceux-ci
peuvent être fournis par Axis ou par
un fournisseur tiers.
• Utilisez uniquement des pièces de
rechange fournies ou recommandées
par Axis.
• Ne tentez pas de réparer le produit
vous-même, contactez Axis ou votre
revendeur Axis pour toute réparation.
• Ce produit Axis doit être utilisé
conformément aux lois et
réglementations locales en vigueur.
Remplacement des piles
Ce produit Axis nécessite une pile au
lithium BR/CR2032 de 3,0 V pour
l'alimentation de son horloge en temps
réel interne. Dans des conditions
normales d'utilisation, cette pile est
censée durer au moins 5 ans. Si la pile
est faible, le fonctionnement de
l'horloge en temps réel peut être
affecté et entraîner sa réinitialisation à
chaque mise sous tension. Un message
enregistré apparaît lorsque la pile doit
être remplacée. Ne remplacez la pile
qu'en cas de nécessité !
Si la pile doit être remplacée, veuillez
contacter www.axis.com/techsup pour
obtenir de l’aide.
• Jetez les piles usagées conformément
aux consignes du fabricant.
• Le remplacement incorrect de la pile
peut entraîner un risque d'explosion.
• Remplacez la pile par une pile
identique ou équivalente
uniquement, en respectant les
recommandations du fabricant.
Deutsch
Sicherheitsvorkehrungen
Bitte lesen Sie diese
Installationsanleitung sorgfältig durch,
bevor Sie mit der Installation des Axis
Produkts beginnen. Halten Sie die
Installationsanleitung bereit, falls Sie
darauf zurückgreifen müssen.
• Lagern Sie das Axis-Produkt in einer
trockenen und belüfteten Umgebung.
• Setzen Sie das Axis Produkt keinen
Vibrationen, Erschütterungen oder
starkem Druck aus. Installieren Sie
das Produkt nicht an instabilen
Halterungen oder instabilen oder
vibrierenden Oberflächen oder
Mauern, da dadurch das Produkt
beschädigt werden könnte.
• Verwenden Sie bei der Installation
des Axis Produkts nur geeignetes
Werkzeug; zu hoher Kraftaufwand
kann das Produkt beschädigen.
• Verwenden Sie keine chemischen,
ätzenden oder aerosolhaltigen
Reinigungsmittel. Verwenden Sie zur
Reinigung ein feuchtes Tuch.
• Verwenden Sie nur Zubehör, das den
technischen Spezifikationen des
Produkts entspricht. Dieses ist von
Axis oder Drittanbietern erhältlich.
• Verwenden Sie nur Ersatzteile, die
von Axis empfohlen bzw.
bereitgestellt wurden.
• Versuchen Sie nicht, das Produkt
selbst zu reparieren. Wenden Sie sich
bei Service-Angelegenheiten an Axis
oder an Ihren Axis-Händler.
• Verwenden Sie dieses Axis-Produkt
unter Beachtung der vor Ort
geltenden rechtlichen
Bestimmungen.
Batteriewechsel
Dieses Axis-Produkt ist mit einer 3,0 V
BR/CR2032 Lithium-Batterie als
Stromversorgung für die interne
Echtzeituhr (RTC) ausgestattet. Unter
normalen Bedingungen hält die
Batterie mindestens 5 Jahre. Bei
entladener Batterie ist der Betrieb der
Echtzeituhr nicht mehr ausreichend
gewährleistet, so dass die Uhr bei
jedem Systemstart zurückgesetzt wird.
Sie erhalten eine Protokollnachricht,
wenn ein Batteriewechsel erforderlich
ist. Die Batterie sollte erst bei Bedarf
gewechselt werden.
Unter www.axis.com/techsup finden
Sie Informationen darüber, was Sie
beim Austausch der Batterie beachten
müssen.
• Verbrauchte Batterien sind gemäß
den Herstelleranweisungen zu
entsorgen.
• Explosionsgefahr bei fehlerhaftem
Batteriewechsel!
• Die Batterie muss durch dasselbe
oder ein gleichwertiges Fabrikat
ersetzt werden, das vom Hersteller
zugelassen ist.
Italiano
Sicurezza
Leggere attentamente questa Guida
all'installazione prima di installare un
prodotto Axis. Conservare la Guida
all'installazione per ulteriori
riferimenti.
• Conservare il prodotto Axis in un
ambiente asciutto e ben ventilato.
• Evitare di esporre il prodotto Axis alle
vibrazioni, agli urti o a forte
pressione. Non installare il prodotto
su staffe instabili, superfici o pareti
instabili o vibranti, poiché ciò
potrebbe danneggiare il prodotto.
• Utilizzare solo strumenti idonei
quando si installa il prodotto Axis.
Una forza eccessiva potrebbe
danneggiare il prodotto.
• Non utilizzare sostanze chimiche,
agenti caustici o detergenti spray.
Utilizzare un panno umido per la
pulizia.
• Utilizzare solo accessori conformi con
le specifiche tecniche del prodotto.
Queste possono essere fornite da Axis
o da terze parti.
• Utilizzare solo parti di ricambio
fornite o raccomandate da Axis.
• Non tentare di riparare il prodotto da
soli, contattare Axis o il rivenditore di
zona Axis per assistenza.
• Questo prodotto Axis deve essere
utilizzato in conformità alle leggi e
alle disposizioni locali.
Sostituzione della batteria
Questo prodotto Axis utilizza una
batteria al litio BR/CR2032 da 3.0 V per
alimentare il real-time clock (RTC)
interno. In normali condizioni questa
batteria ha una durata di almeno 5
anni. La batteria scarica influisce sul
funzionamento dell'RTC, che viene
reimpostato ad ogni accensione. Un
messaggio di registro apparirà quando
la batteria dovrà essere sostituita. La
batteria non deve essere sostituita a
meno che non sia necessario.
Se la batteria deve essere sostituita,
contattare www.axis.com/techsup per
assistenza.
• Smaltire le batterie usate secondo le
istruzioni del produttore.
• Rischio di esplosione se la batteria
non viene sostituita correttamente.
• Sostituire solo con una batteria
identica o equivalente, come
raccomandato dal produttore.
Español
Medidas preventivas
Lea detenidamente esta Guía de
instalación antes de instalar el
producto Axis. Guarde la Guía de
instalación para poder consultarla en el
futuro.
• Guarde el producto Axis en un
entorno seco y ventilado.
• Evite exponer el producto Axis a
vibraciones, golpes o presiones
excesivas. No instale el producto en
soportes inestables ni en superficies o
paredes inestables o con vibraciones,
ya que esto podría dañarlo.
• Utilice solo las herramientas
apropiadas para instalar el producto
Axis; una fuerza excesiva podría
dañarlo.
• No utilice productos químicos,
agentes cáusticos ni limpiadores en
aerosol. Límpielo con un paño
húmedo.
• Utilice solo accesorios que cumplan
las especificaciones técnicas del
producto. Puede obtenerlos de Axis o
de un tercero.
• Utilice solo piezas de recambio
suministradas o recomendadas por
Axis.
• No intente reparar el producto usted
mismo, póngase en contacto con Axis
o con el distribuidor de Axis para los
temas de servicio técnico..
• Este producto Axis se utilizará de
conformidad con la legislación y
normativas locales.
Sustitución de la batería
Este producto Axis utiliza una batería
de litio BR/CR2032 3.0 de 3,0 V como
fuente de alimentación para su reloj de
tiempo real interno (RTC). En
condiciones normales, esta batería
durará un mínimo de 5 años. Cuando la
batería tiene poca carga, el
funcionamiento del RTC se puede ver
afectado, ya que esto puede hacer que
se reinicie cada vez que se encienda.
Aparecerá un mensaje de registro
cuando sea necesario sustituir la
batería. No se debe sustituir la batería
a menos que sea necesario.
Si necesita sustituir la batería, visite la
página www.axis.com/techsup para
recibir asistencia.
• Deseche las baterías usadas según las
instrucciones del fabricante.
• Existe peligro de explosión si la
batería se sustituye de forma
incorrecta.
• Utilice solo baterías de recambio
iguales o equivalentes, de acuerdo
con las recomendaciones del
fabricante.
AXIS F34 Main Unit Installation Guide Page 11
32.5 mm.
(1 1/4 in.)
1x
4x
4x
4x
154.5 mm. (6 1/16 in.)
121 mm. (4 3/4 in.)
121 mm. (4 3/4 in.)
2
1
P
W
R
S
T
A
T
N
E
T
PWR
CA
M
1
CAM2
C
A
M
3CAM4
PoE
PWR
CAM1 CAM2 CAM3 CAM4
PoE
PWR
STAT
NET
Page 12 AXIS F34 Main Unit Installation Guide
SD/SDHC/SDXC SD/SDHC/SDXC
SD/SDHC/SDXC
1
13 14
2
2
2
1
PW
R
S
T
A
T
NE
T
P
WR
C
AM1
C
AM2
C
AM3
C
AM4
Po
E
AXIS F34 Main Unit Installation Guide Page 13
1
4x
P
WR
C
AM1
C
AM2
C
AM3
C
AM4
Po
E
Page 14 AXIS F34 Main Unit Installation Guide
1
4x
ø5 mm. (3/16 in.)
0.3 Nm
(0.22 lb ft)
T20
P
WR
C
AM1
C
AM2
C
AM3
C
AM4
Po
E
Installation Guide Ver.1.0
AXIS F34 Main Unit Printed: August 2015
© Axis Communications AB, 2015 Part No. 54758
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis F34 Main Unit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis F34 Main Unit in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Axis F34 Main Unit

Axis F34 Main Unit User Manual - English - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info