615957

Axis 214 PTZ - Network Camera Manual

33
Zoom out
Zoom in
Previous page
1/53
Next page
33
AXIS 214 PTZ
Date & Time
Current Server Time - displays the current date and time (24h clock). The time can be displayed in 12h
clock format in the Overlay Images (see below).
New Server Time
- Select your time zone from the drop-down list. If you want the server clock to
automatically adjust for daylight savings time, select Automatically adjust for daylight saving time
changes.
From the Time Mode se
ction, select the preferred method to use for setting the time:
• Synchronize with computer time - sets the time
from the clock on your computer.
• Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60
minutes. The NTP server's IP address or host name must be specified in the TCP/IP Advanced
Settings - see page 34.
• Set manually - this option allows you to manually set the time and date.
Note:
When using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. See Network > TCP/IP below.
Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in
the Live View video streams.
Use the predefined formats or use your own custom
date and time formats. See Advanced File Naming &
Date/Time Formats in the help files for information on how to create your
own file formats.
Network - Basic TCP/IP Settings
IP Address Configuration
Your Axis network camera supports both
IP version 4 and IP version 6. Both versions may be enabled
simultaneously, and at least one version must always be enabled.
When using IPv4, the IP address can be set automatically via
DHCP, or a static IP address can be set
manually.
If IPv6 is enabled, your camera will receive an IP address according to the con
figuration in the network
router.
There are also options for setting up notification of changes in the IP address,
and for using the AXIS
Internet Dynamic DNS Service. For more information on setting the IP address, please see the online help.
Notes:
• To receive notification whenever the camera’s IP address changes (via e.g. DHCP), configure the options for notification of IP
address change. See Services below.
• Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 214 PTZ by host name
which is always the same, regardless of the IP address.
Services
Enable ARP/Ping setting of IP address - The IP address can be set
using the ARP/Ping method, which
associates the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled to
prevent unintentional resetting of the IP address.
Notes:
• The ARP/Ping service is automatically disabled 2 minutes after the unit is started, or as soon as an IP address is set.
• Pinging the unit will still be possible when this service is disabled.
Options for notification of IP address change - Automatic IP address assignment via DHCP may lead to the
situation where the IP address changes and you lose contact with the camera. To configure notification of
changes in the IP address, click Settings... and enter the required information.
AXIS Internet Dynamic DNS Service - If the AXIS 214 PTZ has been
registered with the Axis Internet
Dynamic DNS service and the IP address for the product changes, the service is updated to reflect the
change. Check the box to enable/disable automatic updates.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 214 PTZ - Network Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 214 PTZ - Network Camera in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info