615957

Axis 214 PTZ - Network Camera Manual

29
Zoom out
Zoom in
Previous page
1/53
Next page
29
AXIS 214 PTZ
Include pre-trigger buffer - images stored internally in the server from the time immediately preceding the
trigger. Check the box to enable the pre-trigger buffer, enter the desired length of time and specify the
required image frequency.
Include post-trigger buffer - contains i
mages from the time immediately after the trigger. Configure as for
pre-trigger.
Note:
If the pre- or post-buffer is too large for the internal memory, the frame rate will be reduced and no image will be uploaded. If
this occurs, an entry will be created in the unit's log file.
Continue image upload (unbuffered) - enable the upload of images for a fixed length of time. Specify the
length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is
active. Finally, set the desired image frequency to the maximum (the maximum available) or to a specified
frame rate. The frame rate will be the best possible, but might not be as high as specified, especially if
uploading via a slow connection.
Scheduled events
A Scheduled event can be activated at preset times, in a repeating pattern on selected weekdays.
How to set up a scheduled event
This example describes how to set the AXIS 214 PTZ to send an email notification
with saved images from
a set time:
1. Click Ad
d scheduled on the Event types page.
2. Enter a descriptive name for the event, e.g. Scheduled email.
3. Set the Priority (High, Normal or Low).
4. Set the Activation Time parameters (24h clock) when the event is to be active, e.g. start on Fridays
at 18.00 with a duration of 62 hours.
5. Set the When Activated... parameters i.e. set what the AXIS 214 PTZ is to do at the specified time
e.g. send uploaded images to an email address.
6. Click OK to save the event in the Event Types list.
Please see the online help for descriptions of each available option.
Motion Detection
The AXIS 214 PTZ can be configured for motion detection. This feature is used to generate an alarm
whenever movement starts (or stops) in the image. The AXIS 214 PTZ can use a maximum of 10
Include/Exclude windows.
• Include
windows target specific areas within the image
• Ex
clude windows are areas to be ignored within the Include window
Once configured, the motion detection windows will appear in
a list when motion detection is set to trigger
an event. See How to set up a triggered event above.
Notes:
• Using the motion detection feature may decrease overall performance in the camera.
• Motion detection will not function while the lens is moving (i.e. pan, tilt, zoom)
Configuring Motion Detection
With reference to the motion detection parameters
in the table below, follow these instructions to create a
motion detection window.
1. a) For AMC: Check the radio button Con
figure Include Windows to set the type of window. Click
the New button. A new window called DefaultWindow appears over the image. Select the name in
the list of windows and rename the window.
b) For the Java applet: Click the Add Window button. Check the radio button Include or Exclude
to define the type of window. Select the tab for the window and rename the window.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 214 PTZ - Network Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 214 PTZ - Network Camera in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info