615957

Axis 214 PTZ - Network Camera Manual

17
Zoom out
Zoom in
Previous page
1/53
Next page
17
AXIS 214 PTZ
• Brightness - this can be adjusted in the range 0-100.
• Sharpness - controls the amount of sharpening applied to the image.
• IR cut filter - turns the IR filter on or off. Alternatively, when set to Auto the filter will
automatically be switched off when the light level falls below the minimum requirement.
• Use backlight compensation - this setting is used to make the subject appear clearer against e.g. a
bright background.
Please see the online help for more information on these settings.
White Balance
White balance is used to make the colors in the image
appear the same, to compensate for the different
colors present in different light sources.
From the drop-down list, select the white
balance setting suitable for the lighting used for your camera.
For more information please
refer to the online help .
Low Light Behavior
Exposure control -
this setting is used to adapt to the amount/type of light being used. If set to Manual,
select the desired Shutter speed from the drop-down list.
Image Settings
Auto focus enabled (defaul
t setting) - this causes the camera to automatically adjust the focus to produce a
sharp image. Setting the sensitivity to ‘high’ will cause a drop in the frame rate (fps).
MPEG-4
The MPEG-4 standard provides many different coding tools for various applications in different situations.
As most MPEG-4 clients do not support all of these tools, it is usual to instead define and use subsets for
different clients or groups of clients. These settings allow you to define the type of viewing client to use.
Adjusting the maximum bit rate and setting it to variable or constant is
a good way of controlling the
bandwidth used by the MPEG-4 video stream. For more information on these advanced settings, please see
Video and Audio Streams, on page 11, and the online help .
Client Compatibility
Select the correct combination of Video object
type and ISMA compliant to use for your viewing client.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 214 PTZ - Network Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 214 PTZ - Network Camera in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info