615957

Axis 214 PTZ - Network Camera Manual

13
Zoom out
Zoom in
Previous page
1/53
Next page
13
AXIS 214 PTZ
Other methods of accessing the video stream
Video/images from the AXIS 214 PTZ can also be accessed in the following ways:
• If supported by the client, the AXIS 214 PTZ can use Motion JPEG server
push to display video.
This option maintains an open HTTP connection to the browser and sends data as and when
required, for as long as required.
• As single JPEG images in a browser.
Enter e.g. the path: http://<IP address>/axis-cgi/jpg/image.cgi?resolution=CIF
• Windows Media Player. This requires AMC and the MPEG-4 decoder to be installed. The paths
that
can be used are listed below, in the order of preference.
• Unicast via RTP: axrtpu://<IP address>/mpeg4/media.amp
• Unicast
via RTSP:axrtsp://<IP address>/mpeg4/media.amp
• Unicast via RTSP, tunnelled via HTTP:
axrtsphttp://<IP address>/mpeg4/media.amp
• Unicast via RTSP, tunnelled via HTTPS:
axrtsphttps://<IP address>/mpeg4/media.amp
• Multicast: axrtpm://<IP address>/mpeg4/media.amp
Other MPEG-4 clients
Although it may be possible to use other clients to view the MPEG-4 stream, this is not guaranteed by Axis.
For some other clients, e.g. QuickTime™ the Video Object Type must be set to Simple. It may also be
necessary to adjust the advanced MPEG-4 settings. To assess the video stream from e.g. QuickTime™ the
following path can be used:
rtsp://<ip address>/mpeg4/media.amp
This path is for all supported methods, and the client will negotiate wi
th the AXIS 214 PTZ to determine
exactly which transport protocol to use.
Audio transmission methods
The audio stream can be accessed in the Live View page when viewing either Motion JPEG or MPEG.
Using Motion JPEG
The basic transmission method of audio used in conjunction
with Motion JPEG video streaming is
transmission over HTTP. The video and audio streams are not synchronized when using Motion JPEG so the
streams may be slightly out of sync. The latency in any stream should be low, but this will depend on the
network infrastructure.
Using MPEG-4
When using MPEG-4, audio is streamed using the same
protocol as the video stream.
When audio is transmitted using MPEG-4, the Axis product sends synchroni
zation information along with
the streams to the client performing the synchronization.
Audio is streamed from the client to the server over HTTP
when using both Motion JPEG and MPEG-4.
Accessing the Audio Streams
In addition to accessing audio in the Live View page using AMC, audio from the camera can also be
accessed in the following ways:
• HTTP-API - Read about accessing audio for the other
protocols through the HTTP-API at
http://www.axis.com/techsup
• QuickTime/Windows Media Player - these can be used to
listen to the audio stream using the same
methods as for accessing video streams.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 214 PTZ - Network Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 214 PTZ - Network Camera in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info