613427
29
Zoom out
Zoom in
Previous page
1/60
Next page
29
AXIS 210/211 - Event Configuration
Event Configuration
An event in the camera is when an Event Type is activated and causes certain actions to
be performed. The event type is the set of parameters (or conditions) that specifies how and
when which actions will be performed. A common event type is when the camera uploads
images when an alarm occurs. Many event types use an Event Server, to e.g. upload
images to.
This section describes how to set up event servers and event types, i.e. how to configure the
cameras to perform certain
actions when events (e.g. alarms) occur.
Definitions
Event Servers
Event Servers are used to receive e.g. uploaded image files and/or notification messages. To
set up Event server connections in your cameras, go to Setup > Event Configuration >
Event Servers and enter the required information for the required server type.
For details on each setting,
please see the online help available from each web page.
When the setup is complete, the connection can be tested by clicking the Test button (the
conn
ection test takes approximately 10 seconds).
Event type A set of parameters describing how and when the camera will perform certain actions
Triggered Event - see page 30
The circumstances that start an event. E.g. on a signal from an extern
al device, such as a
door switch or a motion sensor.
Scheduled Event - see page 31 The circumstances that start an event. E.g. at a pre-programmed time.
Action
What occurs when the event triggers. E.g. the upload of images to an FTP server, e-mail
no
tification, etc.
Server type Purpose Information required
F
TP Server Receives uploaded images Descriptive name of your choice
Network address (IP address or host name)
User Name and Password (for FTP server)
Upload path e.g. images/
Port number
Use passive mode if there is a firewall between the camera
and FTP server
Use temporary file if your FTP server doesn’t allow an existing
file to be overwritten by a new file with the same name
HTTP Server Receives notification messages
Receives uploaded images
Descriptive name of your choice
URL (IP address or host name)
User Name and Password (for HTTP server)
Proxy address/Proxy port (if required)
Proxy User Name and Password (if required)
TCP Server Receives notification messages Descriptive name of your choice
Network address (IP address or host name)
User Name and Password (for TCP server)
Port number
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 210 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info