613427
16
Zoom out
Zoom in
Previous page
1/60
Next page
16
AXIS 210/211 - Video Streams
Unicasting should be used for video-on-demand broadcasting, so that there is no video
traffic on the network until a client connects and requests the stream. However, as more
and more unicast clients connect, the traffic on the network will increase and may cause
congestion. Although there is a maximum of 20 unicast viewers, note that all multicast
users combined count as 1 unicast viewer.
RTP/RTSP
This unicast method is RTP tunneled over RTSP. This can be used to exploit th
e fact that it
is relatively simple to configure firewalls to allow RTSP traffic.
RTP/RTSP/HTTP
This method can also be used to traverse firewalls.
Firewalls are commonly configured to
allow the HTTP protocol, thus allowing RTP to be tunneled.
The AXIS Media Control
The recommended method of accessing live video (MPEG-4 and/or Motion JPEG) from the
AXIS 210/211 is to use the AXIS Media Control (AMC) in Microsoft Internet Explorer for
Windows. This ActiveX component is automatically installed on first use, after which it
can be configured by opening the AMC Control Panel applet from the Windows Control
Panel. Alternatively, right-click the video image in Internet Explorer.
Other methods of accessing the video stream
Video/images from the AXIS 210/211 can also be accessed in the following ways:
If supported by the client, the AXIS 210/211 can
use Motion JPEG server push to dis-
play video. This option maintains an open HTTP connection to the browser
and sends
data as and when required, for as long as required.
As single JPEG images in a browser
. Enter e.g. the path:
http://<IP address>/axis-cgi/jpg/imag
e.cgi?resolution=320x240
Windows Media Player. This requires AMC and the MPEG-4 d
ecoder to be installed.
The paths that can be used are listed below in the order of preference.
Unicast via RTP: axrtpu://<IP address>/mpeg4/media.amp
Unicast via RTSP: axrtsp://<IP address>/mpeg4/media.amp
Unicast via RTSP, tunneled via HTTP: axrtsphttp://<IP address>/mpeg4/media.amp
Multicast: axrtpm://<IP address>/mpeg4/media.amp
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 210 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info