292576
47
Zoom out
Zoom in
Previous page
1/73
Next page
Guida all’installazione di AXIS 207/207W/207MW Pagina 47
ITALIANO
Connettori
Connettore di rete - Ethernet RJ-45. Supporta la funzionalità Auto-MDIX (solo AXIS
207W/MW) per il rilevamento automatico di cavi di rete dritti o incrociati. Si consiglia l’uso
di cavi schermati.
Connettore di alimentazione - A basso voltaggio da 4,9-5,1V CC, massimo 4,0W. Vedere
l’etichetta sul prodotto per la connessione dei poli
±.
Morsettiera di alimentazione I/O - Utilizzata per varie applicazioni come, ad esempio, la
rilevazione del movimento, l’attivazione di eventi, la registrazione continua, la notifica di
allarmi e così via. Fornisce l’interfaccia per:
1 uscita transistor - per connettere apparati esterni come relays o LED. Le periferiche
connesse possono essere attivate mediante i pulsanti di controllo nella pagina Immagini
dal vivo, oppure tramite il Tipo Evento. L’uscita verrà visualizzata come attiva
(visualizzato in Configurazione evento > Stato porta) se il dispositivo di allarme è attivato.
1 ingresso digitale: specifico per allarmi, consente di connettere periferiche che possono
aprire o chiudere un circuito, ad esempio: sensori di movimento (PIR), contatti porta/
finestra, rilevatori di rottura vetri e così via. Quando viene ricevuto il segnale lo stato
cambia e l’ingresso diventa attivo (visualizzato in Configurazione evento > Stato porta).
Alimentazione ausiliaria e presa di terra
Funzione Numero pin Note Specifiche
Uscita
transistor
Pin 4 Un transistor di tipo NPN open-
collector con connessione
dell'emettitore collegato al polo di
terra. Se si utilizza un relé esterno, è
necessario collegare un diodo in
parallelo al carico per proteggere il
dispositivo da sovratensioni
transitorie.
Carico massimo = 100 mA
Tensione massima = 24V CC
(ingresso per il transistor)
Ingresso
digitale
Pin 3 Collegare a terra (GND) per attivarlo
oppure lasciare isolato (o scollegato)
per disattivarlo.
Non collegare una tensione
superiore a 10V CC.
Terra (GND) AXIS 207 = Pin 2
AXIS 207W/MW = Pin 1
Presa di terra
Ingresso
alimentazione
CC ausiliaria
AXIS 207 = Pin 1
AXIS 207W/MW = Pin 2
Il pin è collegato elettricamente in
parallelo con il connettore
dell’alimentatore PS-H e costituisce
un connettore ausiliario dell'unità per
l'alimentazione principale.
Il pin può essere utilizzato anche per
alimentare una periferica ausiliaria,
con una corrente massima di 50 mA.
Tensione = 4,9-5,1V CC
(tutti i modelli)
Alimentazione minima:
AXIS 207: 2,5W
AXIS 207W: 3,5W
AXIS 207MW: 4,0W
Layout dei pin
1
4
1
4
AXIS 207MW
AXIS 207W
AXIS 207
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 207w network camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 207w network camera in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info