781904
24
Zoom out
Zoom in
Previous page
1/25
Next page
24
PRIOR TO USE
Assembly
1. Thread the mixing paddle (1) clockwise into the mixing element (2). (Fig.2)
2. Drive the assembled mixing paddle onto the drive shaft (3). (Fig.3)
WARNING! Use only a mixing paddle that is designed and suitable for the materi-
al to be mixed. A wrong mixing paddle may put strain on the power tool which
may damage the tool and lead to accidents!
Remove the mixing paddle from the drive shaft by turning it anticlockwise. The paddle may
sit quite tight in its holding fixture. If this is the case, the fixture must be secured with a key
against turning with the paddle. (Fig.4)
OPERATION
Turning on and off
Turning on (Fig.1)
- Press and hold the circuit breaker (5) for the ON / OFF switch; now you can press the ON
/ OFF switch (4) to start the handheld mixer. Once the tool is running properly you can re-
lease the ON / OFF switch, turning off the circuit breaker (5).
Turning off (Fig.1)
- Release the ON / OFF switch (4). The circuit breaker for the ON / OFF switch (5) turns off
automatically.
Speed controller (Fig.5)
With the speed controller (6), the power tool’s speed can be gradually adjusted. The type of
material to be mixed determines the speed rate that is required. Practice will teach you the
optimal speed required by the respective material.
MAINTENANCE
NOTE! Unplug the power plug from the electrical outlet before starting any clean-
ing or maintenance on the power tool.
Cleaning
- Keep the air vents of the machine clean in order to prevent overheating.
- Clean the machine’s casing regularly with a soft cloth, preferably after each use.
- Keep the air vents free from dust and dirt.
- If the dirt cannot be removed easily, use a cloth that is moistened with soapy water.
NOTE! Do not use solvents such as benzene, alcohol, ammonia solutions, etc.
These solvents may damage the plastic parts.
Storage
- The whole machine and all accessories must be thoroughly cleaned before storing.
- Store the machine always out of children’s reach. Put it in a secure position in a dry and
safe place where no extremely high or extremely low temperatures may occur.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AWD 140A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AWD 140A in the language / languages: English, Swedish, Finnish as an attachment in your email.

The manual is 0.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info