Manual AVTech - Velleman DVR4T1 (page 5 of 105) (English, German, Dutch, French, Spanish)

621880

Zoom out

Zoom in

1/105

DVR4T1

V. 03 – 28/12/2015 5 ©Velleman nv

5. Installing the Hard Disk Drive (HDD)

Before the DVR is powered on, make sure you have installed a hard disk, connected at least one camera and an

HDMI monitor. The DVR is designed to automatically detect the video system of the connected cameras (NTSC

or PAL). To make sure the system detection is correct; please check if the cameras are connected to the DVR

and power-supplied before the DVR is powered on.

Notes:

 It is not recommended to use an audio/video 24/7 hard disk in this device. For a list of compatible hard

disks, please refer to the appendices in the full user manual.

 It is recommended to clear all data on a new hard disk after the DVR is powered on, and to set the date

and time correctly to make sure that recorded data are not mixed with older data. For details on clearing all

data, refer to Clearing the Hard Disk.

Refer to the illustrations on page 2 of this manual.

There are two hard disk brackets.

1. Loosen the screws on the top cover of the DVR and open it.

2. To install a hard disk in the first bracket: first remove the bracket. Make sure the PCB side of the hard disk

is facing up. Then align the screw holes of the bracket with the screw holes of the hard disk, and fasten the

hard disk to the bracket. Connect the power and data bus connectors to the hard disk. Replace the bracket

in the DVR.

3. To install a hard disk in the second bracket: first connect the power and data bus connectors to the hard

disk. Make sure the PCB side of the hard disk is facing up. Then align the screw holes of the bracket with

the screw holes of the hard disk, and fasten the hard disk to the bracket.

4. When the hard disk is installed, close the top cover and fasten it with the screws.

6. User Interface

Refer to the illustrations on page 2 of this manual.

6.1 DVR Access

1. Connect a USB mouse to the mouse port  on the DVR front panel, and check if there is a mouse icon

on the screen, indicating the USB mouse is detected properly.

2. Move your mouse to enter the DVR password with the password keypad. The default user name and

password are both admin.

The status will change from (key lock) to (unlock).

Note: You can configure four different user levels with different access privileges in the main menu

(SYSTEM) > ACCOUNT. For more information, refer to User Creation further in this manual.

6.2 Live Page

1. system time

2. DVR status bar

3. available HDD capacity

4. channel status bar

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AVTech - Velleman DVR4T1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AVTech - Velleman DVR4T1 Manual

Product: